Specifying Images For Printing Without Using Dpof (Single-Frame Printing) - FujiFilm FinePix V10 Owner's Manual

CAMERA CONNECTION
3
CHECKING USB CHECKING USB
PICTBRIDGE PICTBRIDGE
4
1 0 2 0
P I C T B R I D G E P I C T B R I D G E
PRINT WITH DATE PRINT WITH DATE
PRINT WITHOUT DATE PRINT WITHOUT DATE
P R I N T D P O F P R I N T D P O F O K O K
5
PRINT DPOF OK? PRINT DPOF OK?
TOTAL: TOTAL: 9 SHEETS SHEETS
CANCEL CANCEL
YES YES CANCEL CANCEL
6
PRINTING PRINTING
1/9 SHEETS SHEETS
CANCEL CANCEL
90
w
Press the " " button for about 1 second to turn the
camera on in Playback mode.
"CHECKING USB" appears and then the menu is
displayed on the LCD monitor.
●
!
ò
If the menu does not appear, check whether the "
®
MODE setting is " " PICTBRIDGE.
●
!
Depending on the printer, some functions are disabled.
1 Press "a" or "b" to select " u PRINT DPOF".
2 Press "c".
●
!
u
When [ NOT SET DPOF] appears, the DPOF settings are
not specified.
●
!
To use DPOF printing, the DPOF settings must be specified
on FinePix V10 beforehand (➡P.55, 57).
●
!
Even when "WITH DATE" is specified in the DPOF settings,
the date is not inserted on printers that do not support date
printing.
u
" PRINT DPOF OK?" appears on the LCD
monitor. Press the "MENU/OK" button to begin
printing.
The specified frames (files) are printed
continuously.
●
!
Press the "DISP/BACK" button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
6.2.2 Specifying images for printing without using DPOF ( single-frame printing )
1
1 0
" USB
2 0
1
2
3
2
USB socket USB socket USB socket USB socket USB socket USB socket
3
CHECKING USB CHECKING USB
PICTBRIDGE PICTBRIDGE
4
0 1
PICTBRIDGE PICTBRIDGE
PRINT WITH DATE PRINT WITH DATE
PRINT WITHOUT DATE PRINT WITHOUT DATE
PRINT DPOF PRINT DPOF
1 Press the " w " button for about 1 second to turn
the camera on in Playback mode.
2 Select " ® " PICTBRIDGE in "
˜
in the " " SET-UP menu (➡P.76, 78).
3 Turn the camera off.
PICTBRIDGE PICTBRIDGE
:
ENGLISH ENGLISH
: SET SET
:
: NTSC NTSC
:
OK OK
●
!
Do not connect to a PC when the "
®
set to " " PICTBRIDGE. See P.106 if you connect to a PC
by mistake.
1 Connect the camera to the printer using the USB
cable (included).
DC IN 5V DC IN 5V DC IN 5V
2 Plug the AC power adapter connector into the
socket socket socket
"DC IN 5V" socket on the camera and then plug
the AC power adapter into the power outlet.
3 Turn the printer on.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Use an xD-Picture Card that was formatted on FinePix V10.
w
Press the " " button for about 1 second to turn the
camera on in Playback mode.
"CHECKING USB" appears and then the menu is
displayed on the LCD monitor.
●
!
If the menu does not appear, check whether the "
MODE setting is " ®
●
!
Depending on the printer, some functions are disabled.
1 Press "a" or "b" to select "PRINT WITH DATE"
0 2
or "PRINT WITHOUT DATE". If "PRINT WITH
DATE" is selected, the date is imprinted on your
prints.
2 Press "c".
O K O K
●
!
"PRINT WITH DATE" is not available when the camera is
connected to a printer that does not support date printing.
ò " USB MODE
ò
" USB MODE setting is
ò " USB
" PICTBRIDGE.
6
Continued 91