Specifying Images For Printing Without Using Dpof (Single-Frame Printing) - FujiFilm FinePix E500 Owner's Manual

6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER
— PictBridge FUNCTION
5
ＰＲＩＮＴ ＤＰＯＦ ＰＲＩＮＴ ＤＰＯＦ
ＴＯＴＡＬ／ １９ＳＨＥＥＴＳ ＴＯＴＡＬ／ １９ＳＨＥＥＴＳ
ＰＲＩＮＴ ＤＰＯＦ ＯＫ？ ＰＲＩＮＴ ＤＰＯＦ ＯＫ？
ＹＥＳ ＹＥＳ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
6.2.2 Specifying images for printing without using DPOF ( single-frame printing )
1
0 1 3 0
2 0
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
3
１ ２ ４
ＦＲＡＭＥ ＮＯ． ：ＣＯＮＴ． ＦＲＡＭＥ ＮＯ． ：ＣＯＮＴ．
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ
ＳＴＡＲＴ−ＩＭＡＧＥ ：ＯＦＦ ＳＴＡＲＴ−ＩＭＡＧＥ ：ＯＦＦ
言語 ／ＬＡＮＧ． ：ＥＮＧＬＩＳＨ 言語 ／ＬＡＮＧ． ：ＥＮＧＬＩＳＨ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
2
(USB) socket
AC-3V (sold separately)
3
ＵＳＢ ＵＳＢ
ＣＨＥＣＫＩＮＧ ＵＳＢ ＣＨＥＣＫＩＮＧ ＵＳＢ
84
Press the "MENU/OK" button to download the data
to the printer and print the frames specified in the
DPOF settings.
●
!
Press the "BACK (DISP)" button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately. Printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
1 Press the "POWER" button to turn the camera
on.
2 Select " ®
" in "USB MODE" in the SET-UP
menu (➡P.69).
3 Press the "POWER" button to turn the camera
off.
●
!
Do not connect to a PC when the USB mode setting is set to
" ® ". See P.105 if you connect to PC by mistake.
1 Connect the camera to the printer using the USB
cable (included).
2 Turn the printer on.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Please connect the AC Power Adapter AC-3V (sold
separately) or AC-3VW (included with optional PictureCradle
CP-FXA10) to your camera.
●
!
Use an xD-Picture Card that was formatted in the camera.
w
1 Set the Mode switch to " ".
2 Press the "POWER" button to turn the camera
on.
" " appears and then the menu is
s
displayed on the LCD monitor.
●
!
If the menu does not appear, check whether the USB mode
" ® ".
setting is
●
!
Depending on the printer, some functions are disabled.
4
1 0 2 0
ＰＩＣＴＢＲＩＤＧＥ ＰＩＣＴＢＲＩＤＧＥ
ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ
ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＰＲＩＮＴ ＤＰＯＦ ＰＲＩＮＴ ＤＰＯＦ
ＳＥＴ ＳＥＴ
5
1 0 0 2 0 3
１００−０００２ １００−０００２
ＴＯＴＡＬ：００００２ ＴＯＴＡＬ：００００２
０２ ０２ ＳＨＥＥＴＳ ＳＨＥＥＴＳ
ＦＲＡＭＥ ＦＲＡＭＥ
ＹＥＳ ＹＥＳ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
6
ＰＲＩＮＴＩＮＧ ＰＲＩＮＴＩＮＧ
１／ １／ ３６ ３６ＳＨＥＥＴＳ ＳＨＥＥＴＳ
ＣＡＮＣＥＬ ＣＡＮＣＥＬ
◆ ◆
Disconnecting the printer
(USB) socket
1 Press "a" or "b" to select "PRINT WITH DATE"
or "PRINT WITHOUT DATE". If "PRINT WITH
DATE" is selected, the date is imprinted on your
prints.
2 Press the "MENU/OK" button.
●
!
"PRINT WITH DATE" is not available when the camera is
connected to a printer that does not support date printing.
1 Press "d" or "c" to display the frame (file) for
which you want to specify PRINT settings.
2 Press "a" or "b" to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more PRINT settings, repeat steps 1
and 2.
3 Always press the "MENU/OK" button after the
settings are completed.
●
!
Movie images cannot be printed.
Press the "MENU/OK" button to download the data
to the printer and start printing the specified
number of prints.
To end printing, press the "BACK (DISP)" button.
●
!
Press the "BACK (DISP)" button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately. Printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
1Check that " " is not displayed on the
f
camera's screen.
2Turn the camera off. Unplug the USB cable.
6
85