Installation On A Mac Os X - FujiFilm FinePix V10 Owner's Manual

5.1 INSTALLATION ON A Windows PC
Do not connect the camera to your PC until the software installation is completed.
Install FinePixViewer as instructed in the Quick start guide.
1
◆
Launching the installer manually
1 Double-click the "My Computer" icon.
✽ Windows XP users should click "My Computer" in the "Start" menu.
2 Right-click "FINEPIX" (CD-ROM drive) in the "My Computer" window and select "Open".
3 Double-click "SETUP" or "SETUP.exe" in the CD-ROM window.
✽ The way file names are displayed differs as described below depending on your PC settings.
i File extensions (3-letter suffixes indicating the file type) may be shown or hidden. (e.g. Setup.exe or Setup)
i Text may be shown normally or all in uppercase (e.g. Setup or SETUP).
◆
Installing other applications
You may see messages for installing ImageMixer VCD2 LE for FinePix. Install this application as
directed by the on-screen instructions.
Install DirectX as directed by the on-screen instructions and then restart your PC. If the latest
2
version of DirectX is already installed on your PC, this installation is not performed.
●
!
If the latest version is already installed, this window does not appear.
●
!
Do not remove the CD-ROM during this procedure.
After restarting, the USB Video Class Driver would
3
be installed.
●
!
If the latest version is already installed, this window does not
appear.
●
!
The driver is only installed on Windows XP SP1.
After restarting the PC, a message appears stating "Installation of the FinePixViewer has been
4
completed".
86
◆
◆

5.2 INSTALLATION ON A Mac OS X

Pre-installation checklist
■ Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your
system before you begin the installation.
Compatible Mac
Power Macintosh G3
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, or PowerBook G4, Power Macintosh G5
Operating System
Mac OS X (compatible with version 10.2.8 to 10.3.9)
RAM
192 MB minimum
256 MB or better recommended
Hard disk space
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
800 × 600 pixels or better, at least 32,000 colors
Display
(When using ImageMixer VCD2 LE for FinePix: 1024 × 768 or better)
✽3
Internet connection i To use the FinePix Internet Service or mail attachment function
An Internet connection or e-mail transmission software is needed
i Connection speed: 56 k bps or better recommended
✽1 Models with a USB port as a standard feature
✽2 This software does not support QuickTime 7.
✽3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
◆ ◆
Notes
i Connect the camera directly to the Macintosh using the USB cable (included). The software may not
operate correctly if you use an extension cable or connect the camera via a USB hub.
i Push the USB connector fully into the socket to ensure that it is securely connected. The software
may not operate correctly if the connection is faulty.
i Additional USB interface board is not guaranteed.
Turn your Macintosh on and start up Mac OS X. Do not launch any other applications.
1
When the bundled CD-ROM is loaded into the CD-ROM
2
drive, the "FinePix" icon appears. Double-click the
"FinePix" icon to open the "FinePix" volume window.
Double-click on "Installer for MacOSX".
3
The Installer setup dialog appears. Click the [Installing
4
FinePixViewer] button.
●
!
For more information on what is installed, click the [Read Me First]
button and [Using FinePixViewer] button.
✽1 ✽1
, PowerBook G3 ,
✽2
Continued
5
87