Set-Up Menu Options; Image Display - FujiFilm FinePix V10 Owner's Manual

SET-UP

■ SET-UP menu options

Settings Display Factory default
áIMAGE ZOOM/3 SEC/
1.5 SEC
DISP. 1.5 SEC/OFF
äSHUTTER
OFF/1/2/3 2
VOLUME
àBEEP
1
OFF/1/2/3 2
VOLUME
ãPLAYBACK
SET 7
VOLUME
éFRAME
CONT./RENEW CONT.
NO.
êLCD
SET 0
BRIGHTNESS
ëDIGITAL
ON/OFF OFF
ZOOM
îAUTO
5 MIN/2 MIN/OFF 2 MIN
POWER OFF
ÎLCD POWER
2 ON/OFF ON
SAVE
ïFORMAT
OK –
ìDATE/TIME SET –
óTIME
SET –
DIFFERENCE
ô
ENGLISH
öBACKGROUND
SET –
COLOR
òUSB
¶/® ¶
MODE
3
õVIDEO
NTSC/PAL –
SYSTEM
úRESET OK –
●
!
Always turn the camera off when replacing the battery. Opening the battery cover or disconnecting the AC power adapter
without turning the camera off may cause the camera settings to revert to the factory default values set at shipment.
78
✽ How to use the SET-UP menu (➡P.76)
Explanation
Specifies whether an image checking screen (photography
result) appears after taking a picture.
The image is displayed for a few moments and then recorded.
The color tones in images recorded may differ from actual
color. Play back the recorded images to check them.
Sets the volume of the sound emitted when the shutter operates.
Sets the volume of the tone emitted when the camera
controls are used.
Sets the volume of playing back movie and voice memo.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin again.
Sets the LCD monitor brightness.
Specifies whether digital zoom is used together.
Sets the time of turning camera off when camera is not
used.
Darkens the LCD monitor when camera is not used.
Erases all files.
Corrects the date and time.
Specifies the time difference settings.
Specifies the language used for LCD monitor display.
Specifies the colors of menu and cursor.
¶: DSC (Mass storage device) mode
Provides a simple way to read images from an xD-Picture
Card and store images onto an xD-Picture Card.
®: PictBridge
When a printer that supports PictBridge is available, images
can be printed by connecting the camera directly to the
PictBridge-compatible printer without a PC.
Specifies whether video output is set to NTSC or PAL.
Resets all the camera settings (other than the DATE/TIME,
TIME DIFFERENCE, , VIDEO SYSTEM and
BACKGROUND COLOR) to the factory default values set at
shipment. A confirmation message appears when you press
"c". To reset the camera settings, press the "MENU/OK"
button.
á IMAGE DISPLAY
Page
IMAGE DISP. IMAGE DISP.
: 1.5 SEC
79
1
:
2 :
: SET SET
3
: CONT. CONT.
–
:
SET SET
–
80
80
81
81
Enlarging images
1
82
ZOOM (CONTINUOUS) ZOOM (CONTINUOUS)
82
83
16
83 NEXT SHOOTING NEXT SHOOTING
0 1
18
–
93
2
89
–
–
✽ How to use the SET-UP menu (➡P.76)
Use this setting to specify whether images are
displayed after shooting.
ZOOM: The center of the focusing position is shown
ZOOM ZOOM
SEC
3 SEC SEC
enlarged. Use this mode to check details of
1.5 SEC SEC
image.
OFF OFF
3 SEC/1.5 SEC: The image appears for about 3 or
1.5 seconds and is then recorded.
OFF: Images are recorded without being displayed.
●
!
In Long-period continuous shooting, the images do not
appear.
●
!
In top 3-frame continuous shooting and final 3-frame
continuous shooting, the images appear for a set time before
being recorded even when "OFF" is selected.
●
!
The color tones in images displayed when "3 SEC" or "1.5
SEC" is selected may differ slightly from those in the images
actually recorded.
When this function is enabled, the enlarged image
appears on the LCD monitor. Using the Zoom
switch and the "a", "b", "d" or "c" button allows
Navigation screen
you to check the focus.
1 Move the Zoom switch to zoom in or out the
image.
2Press "a", "b", "d" or "c" to display another part
of the image.
●
!
2 0
When " ` " quality setting is selected, the image cannot be
enlarged.
●
!
Press the "DISP/BACK" button to cancel the zoom setting.
●
!
This function is disabled when setting the continuous
shooting.
●
!
This function is disabled when selecting "
SHOOTING MODE.
Press the "MENU/OK" button to take another
picture.
4
À & d " in " q "
79