Connecting The Camera Directly To The Printer — Pictbridge Function; Specifying Images For Printing On The Camera; Specifying Images For Printing Without Using Dpof (Single-Frame Printing) - FujiFilm FinePix F450 Owner's Manual

6.4 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER —
PictBridge FUNCTION
When a printer that supports PictBridge is available, images can be printed by connecting the
camera directly to the PictBridge-compatible printer without using a PC.
●
!
In PictBridge function, images photographed on other than a camera may not be printed.

6.4.1 Specifying images for printing on the camera

1
1 0 0 3
ON OFF
0 2
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
1 3
2 4
ＦＲＡＭＥ ＮＯ． ：ＣＯＮＴ． ＦＲＡＭＥ ＮＯ． ：ＣＯＮＴ．
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ
ＳＴＡＲＴ−ＩＭＡＧＥ ：ＯＦＦ ＳＴＡＲＴ−ＩＭＡＧＥ ：ＯＦＦ
言語／ＬＡＮＧ． ：ＥＮＧＬＩＳＨ 言語 ／ＬＡＮＧ． ：ＥＮＧＬＩＳＨ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
2
3
1 0
0 2
4
ＵＳＢ ＵＳＢ
ＣＨＥＣＫＩＮＧ ＵＳＢ ＣＨＥＣＫＩＮＧ ＵＳＢ
82
1 Slide the Power switch to the side to turn the
camera on.
2 Select " ®
" in "USB MODE" in the "SET-UP"
menu (➡P.60).
3 Slide the Power switch to the side to turn the
camera off.
●
!
Do not connect to a PC when the USB mode setting is set to
" ® ". See P.94 if you connect to a PC by mistake.
1 Connect the cradle to the printer using the USB
cable.
2 Set the camera into the cradle.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Use an xD-Picture Card that was formatted on the camera.
1 Set the "USB/PLAY" switch on the cradle to the
"USB" position.
2 Press the "POWER" button on the cradle.
" " appears and then the menu is
s
displayed on the LCD monitor.
●
!
If the menu does not appear, check whether the USB mode
" ".
®
setting is
●
!
Depending on the printer, some functions are disabled.
5
1 0 0 2
ＰＩＣＴＢＲＩＤＧＥ ＰＩＣＴＢＲＩＤＧＥ
ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ ＰＲＩＮＴ ＷＩＴＨ ＤＡＴＥ
ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ ＰＲＩＮＴ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＰＲＩＮＴ ＤＰＯＦ ＰＲＩＮＴ ＤＰＯＦ
ＳＥＴ ＳＥＴ
6
ＰＲＩＮＴ ＤＰＯＦ ＰＲＩＮＴ ＤＰＯＦ
ＴＯＴＡＬ／ ＴＯＴＡＬ／ １ １ＳＨＥＥＴＳ ＳＨＥＥＴＳ
ＰＲＩＮＴ ＤＰＯＦ ＯＫ？ ＰＲＩＮＴ ＤＰＯＦ ＯＫ？
ＹＥＳ ＹＥＳ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
ＰＲＩＮＴ ＤＰＯＦ ＰＲＩＮＴ ＤＰＯＦ
ＰＲＩＮＴＩＮＧ ＰＲＩＮＴＩＮＧ
１／ １／ １ １ＳＨＥＥＴＳ ＳＨＥＥＴＳ
ＣＡＮＣＥＬ ＣＡＮＣＥＬ

6.4.2 Specifying images for printing without using DPOF (single-frame printing)

1
1 0 0 3
ON OFF
0 2
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
1 3
2 4
ＦＲＡＭＥ ＮＯ． ：ＣＯＮＴ． ＦＲＡＭＥ ＮＯ． ：ＣＯＮＴ．
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ
ＳＴＡＲＴ−ＩＭＡＧＥ ：ＯＦＦ ＳＴＡＲＴ−ＩＭＡＧＥ ：ＯＦＦ
言語 言語／ＬＡＮＧ． ：ＥＮＧＬＩＳＨ ／ＬＡＮＧ． ：ＥＮＧＬＩＳＨ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
1 Press "a" or "b" to select " u PRINT DPOF".
2 Press the "MENU/OK" button.
●
!
" d "
When appears, the DPOF settings are not
specified.
●
!
To use DPOF printing, the DPOF settings must be specified
on FinePix F450 beforehand (➡P.52).
●
!
Even when "WITH DATE" is specified in the DPOF settings,
the date is not inserted on printers that do not support date
printing.
Press the "MENU/OK" button to download the data
to the printer and print the frames specified in the
DPOF settings.
Press the "DISP/BACK" button to return to step 5.
●
!
Press the "DISP/BACK" button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
1 Slide the Power switch to the side to turn the
camera on.
2 Select " ®
" in "USB MODE" in the "SET-UP"
menu (➡P.60).
3 Slide the Power switch to the side to turn the
camera off.
●
!
Do not connect to a PC when the USB mode setting is set to
" ® ". See P.94 if you connect to PC by mistake.
Continued
6
83