Increasing Monitor Brightness; Photo Mode Photography; Quality Mode (Number Of Recorded Pixels) - FujiFilm FinePix V10 Owner's Manual

PHOTOGRAPHY FUNCTIONS
fi INCREASING MONITOR BRIGHTNESS
This is useful when checking the shot composition for dimly lit scenes (Slow synchro shots, etc.).
1
2
N N N 12 12 12
UP UP UP UP UP
38
Available Photography modes:
AUTO, À, À&d,
m, ,, ., ©, s
q
Set the Mode switch to " ".
fi
Press the " " button.
" " appears on the LCD monitor and the subject is
displayed brightly.
To cancel increased brightness, press the "
button again.
This function is automatically canceled after each
shot.
●
!
When this function is active, it will increase the amount of
speckling in images on the LCD monitor. This is normal and
does not affect the photographed image.
●
!
This function is purely for checking the composition of your
shot. It does not increase the brightness of the image.
●
!
If you operate this function in the dark, you cannot check the
subject on the LCD monitor.
●
!
The color tones may vary depending on the subjects.
p PHOTO MODE PHOTOGRAPHY
˘ QUALITY MODE ( NUMBER OF RECORDED PIXELS )
1
1 0
2
0 1
fi
"
QUALITY QUALITY
:
:
AUTO AUTO
: STD STD
PHOTO MODE PHOTO MODE
3
1 0
2592x1944:
:
: AUTO AUTO
:
STD STD
PHOTO MODE PHOTO MODE
1 Set the Mode switch to "
2 0
2 Press the " p
" button to display the menu on the
LCD monitor.
The quality setting is retained even when the
camera is turned off or the mode setting is changed.
1 Press "a" or "b" to select "
2 0
2 Press "c".
N N F
N
1 Press "a" or "b" to change the setting.
2 0
2 Press the "MENU/OK" button to confirm the
setting.
12 FRAMES FRAMES
N F F
N
●
!
The number in the top right corner of LCD monitor shows the
number of available frames.
●
!
When changing the quality setting, the number of available
frames also changes (➡P.23).
q
".
˘
" QUALITY.
3
Continued 39