Quality Settings In Still Photography Mode; Quality Settings In Movie Mode; Sensitivity - FujiFilm FinePix S7000 Owner's Manual

PHOTO MODE STILL PHOTOGRAPHY/MOVIE
3 Advanced
QUALITY MODE ( NUMBER OF RECORDED PIXELS )
Features
1
1 0 0 2
3 0
2
1 0 0 2

Quality settings in Still photography mode

ＱＵ Ａ Ｌ Ｉ Ｔ Ｙ Ｕ Ａ Ｌ Ｉ Ｔ Ｙ
１ ０ １ ０
２ ０ ２ ０
２ ５ ２ ５
３ ３ Ｆ Ｒ ３ ３ Ｆ Ｒ ＡＭ ＡＭＥ Ｓ Ｅ Ｓ
Ｓ Ｔ Ｄ Ｓ Ｔ Ｄ
Ａ Ｕ Ｔ Ｏ Ａ Ｕ Ｔ Ｏ
Quality mode
F (4048 × 3040)
Printing at A3 size. For better image quality, select "
N (4048 × 3040)
Printing at A3 size.
(2848 × 2136)
Printing at A4 size or printing part of the image cropped at A5 or A6 size.
(2016 × 1512)
Printing at A4 or A5 size or printing part of the image cropped at A6 size.
(1600 × 1200)
Printing at A5 or A6 size.
(1280 × 960)
Printing at A6 size.

Quality settings in Movie mode

ＱＵＡ Ｌ Ｉ Ｔ Ｙ ＱＵ Ａ Ｌ Ｉ Ｔ Ｙ
６ ４ ０ ｘ ４ ８ ０ ６ ４ ０ ｘ ４ ８ ０
３ ２ ３ ２ ０ ｘ ０ ｘ ２ ４ ２ ４ ０
32
1 Set the Power switch to " ".
2 Set the Mode dial to Still photography mode or
Movie mode.
3 Press the Photo mode ( ) button.
The quality setting is retained even if you turn the
camera off or change the Mode dial setting.
1 Press "d" or "c" to select the " " quality setting
and then press "a" or "b" to change the setting.
2 Press the "MENU/OK" button to confirm the
setting.
Choose from 6 settings. Using the table below as a
guide, select the setting that best suits the aims.
G
!
The numbers to the right of each setting show the number of
available frames.
G
!
When changing the quality setting, the number of available
frames also changes (➡P.26).
Sample Uses
F".
The movie sizes are " " and " ".
h Movie size
640 × 480 pixels (for better quality)
320 × 240 pixels (to record longer movies)
h Frame rate
30 frame per second (fixed)
See P.117 for information on the frame rate.
PHOTO MODE STILL PHOTOGRAPHY
1
1 0 0 2
3 0
2
1 0 0 2
Ｉ Ｓ Ｏ Ｉ Ｓ Ｏ
８ ０ ０ ８ ０ ０
４ ０ ０ ４ ０ ０
Ａ Ｕ Ｔ Ｏ Ａ Ｕ Ｔ Ｏ
Ａ Ｕ Ｔ Ｏ Ａ Ｕ Ｔ Ｏ Ｓ Ｔ Ｄ Ｓ Ｔ Ｄ
, , , ,
Ｉ Ｓ Ｏ Ｉ Ｓ Ｏ
８ ０ ０ ８ ０ ０
４ ０ ０ ４ ０ ０
２ ０ ０ ２ ０ ０
２ ０ ０ ２ ０ ０
Ｓ Ｔ Ｄ Ｓ Ｔ Ｄ
3
３３ ３３
ＩＳＯ ４００ ＩＳＯ ４００
Ｐ Ｐ ２５０ ２５０ Ｆ５．６ Ｆ５．６

SENSITIVITY

1 Set the Power switch to " ".
2 Set the Mode dial to Still photography mode.
3 Press the Photo mode ( ) button.
G
!
In " " Movie mode, do not set the " " (sensitivity) setting.
Sensitivity is retained even when the camera is
turned off or the Mode dial is chang to another
setting.
1 Press "d" or "c" to select the "
" setting and
then press "a" or "b" to change the setting.
2 Press the "MENU/OK" button to confirm the
setting.
h Settings
: AUTO (160 to 800) / 400 / 800
, , , and : 200 / 400 / 800
G
!
When setting CCD-RAW (➡P.88), only the "200" and "400"
sensitivity settings can be selected.
G
!
While selecting a higher sensitivity setting will allow you to
take pictures in darker locations, it will also increase the
amount of speckling in your images. Streaking may also be
visible in shots of scenes such as the night sky.
Choose the sensitivity setting that best suits the conditions.
Selecting AUTO as the sensitivity setting, the
camera automatically selects the appropriate
sensitivity setting for the subject brightness.
The AUTO sensitivity setting can be selected in the
" " Photography modes.
When the sensitivity is set to "200", "400" or "800",
the selected sensitivity setting appears on the
screen.
33