FujiFilm FinePix S7000 Owner's Manual page 49

5.4 INSTALLATION ON A Mac OS X
FinePixViewer and RAW FILE CONVERTER LE are installed on Mac OS X.
Turn your Macintosh on and start up Mac OS X. Do not launch any other applications.
1
Insert the enclosed CD-ROM into the CD-ROM
2
drive. The "FinePix" window opens.
G
!
If the "FinePix" window does not open automatically, double-
click the CD-ROM icon.
Double-click "Installer for MacOS X".
3
4
Click the " " icon.
(This operation is not required on version 10.2 (or
later).)
Enter the administrator name and password. Then
5
click the [OK] button.
G
!
The window displayed in Mac OS X is slightly different.
Click the [Continue] button.
6
Quit any other programs that are running and then click the [Continue] button.
7
Click the [Continue] button in the "Software License Agreement" window.
8
96
Click the [Continue] button.
9
G
!
The software is installed in the "Applications" folder on the installation destination disk.
Click the [Install (upgrade)] button.
10
Enter your administrator name and password and then click [OK].
11
An installation progress window appears. (Installation may take several minutes)
12
When you have completed the installation, click the
13
[Restart] button.
Launch "Image Capture" from the "Applications" folder.
14
Change the ImageCapture settings.
15
(OS X 10.1.5)
(1) Select "Other..." from "Hot plug Action".
(OS X 10.2 or later)
(1) Select "Preferenes..." from the "Image Capture"
menu.
(2) Select "Other..." from "When a camera is
connected, open".
Select "FPVBridge" from "FinePixViewer" folder in
16
the "Applications" folder and click the "Open" button.
Quit ImageCapture.
17
97