6.2 Using Finepixviewer - FujiFilm FinePix S7000 Owner's Manual

6.1 CAMERA CONNECTION
6.1.4 Disconnecting the camera
1
Perform the steps shown below before you turn the camera off. This procedure differs
2
depending on the operating system software (or PC) you are using.
Windows 98/98 SE
No PC operation is needed.
Windows Me/2000 Professional/XP
1 Right-click the removable disk icon in the "My
Computer" window and select Eject. This step is
only required in Windows Me.
2 Left-click the Eject icon in the taskbar and select
"USB Disk".
3 The menu option shown below appears. Click on
this option.
4 The "Safe To Remove Hardware" message box appears. Click the [OK] button or the close
button.
Macintosh
Drag the "Removable drive" icon on the desktop to
the Trash.
G
!
When you drag the icon to the Trash, "
on the camera's screen.
3
0 1 2 0
USB socket
(mini-B)
DC IN 5V socket
102
1 Quit all applications (FinePixViewer etc.) that are
using the camera.
2 Check that the indicator lamp is lit green (no
data is being exchanged with the computer).
For a DSC connection, proceed to step
For a PC CAMERA connection, proceed to step
G
!
Even when "Copying" is no longer displayed on the computer,
the camera and the computer may still be exchanging data.
Always check that the indicator lamp is lit green.
✽ Screen for Windows Me
✽ Screen for Windows Me
" appears
1 Turn the camera off.
2 Unplug the USB cable (mini-B) from the camera.

6.2 USING FinePixViewer

6.2.1 Mastering FinePixViewer
For all information on FinePixViewer functions, refer to "How to Use FinePixViewer" in the Help
menu for details.
N
Macintosh
h To read "How to Use FinePixViewer"...
2 You must install Adobe Systems' Acrobat Reader. See P.94 for information on installing Acrobat
.
3 Reader.
.
G
!
For more information on using Acrobat Reader, refer to the Acrobat Reader "Help" menu.
h What is explained in "How to Use FinePixViewer"...
"How to Use FinePixViewer" covers a range of topics, including batch processing and ordering prints.
I Example: Looking up slide shows
1 Click "How to Use FinePixViewer" in the FinePixViewer Help menu.
2 Click "Basic Operation" and then click " Basic Slide Show Operations" in the menu that appears.
3 The "Basic Slid Show Operations" information appears. Press the "<<<" key to view the previous
page or the " >>>" key to view the next page.
6.2.2 Uninstalling the software
Only perform this operation when you no longer require the installed software or when the software
was not installed correctly.
Windows
1 Turn on your PC.
2 Disconnect the camera (➡P.102).
3 Quit all currently running applications.
4 Close all files.
5 Open the "My Computer" window, open the
"Control Panel", and double-click "Add/Remove
Programs".
6 The "Add/Remove Programs Properties" window
appears. Select the software to be uninstalled
(FinePixViewer or the driver) and then click the
[Add/Remove] button.
N
<To remove FinePixViewer>
<To remove the driver software>
Continued 103