FujiFilm FinePix S7000 Owner's Manual page 27

CONTINUOUS SHOOTING
STILL PHOTOGRAPHY FUNCTIONS
Long-period continuous shooting
３ ３ ３ ３
ＡＵＴＯ ２ ５ ０ ＡＵＴＯ ２ ５ ０ Ｆ ５． ６
N
Focusing on a moving subject
If you press the Shutter button down halfway to focus on the subject at the starting point A, the subject
may no longer be in focus when it reaches point B where you want to take the shot.
In such situations, focus on point B beforehand and then lock the focus so that it does not shift (lock
pin).
The lock pin feature is also useful for photographing fast-moving subjects that are difficult to focus on.
Focus on and the focus is wrong at A
A
Starting point
FAR
52
This mode allows you to take up to 40 continuous
shots (at intervals as short as 1 second).
G
!
Long-period continuous shooting cannot be used in the "
" ", " ", " " and " " modes.
N
B .
Use lock pin to lock the focus.
B
Point where you want to take the picture
NEAR
N
Quality mode and Long-period continuous shooting
If Long-period continuous shooting is selected, the quality setting may be automatically changed.
Select a setting other than Long-period continuous shooting, check the quality setting and, if necessary,
reset it (➡P.32).
When the quality setting before Long-period continuous shooting was set was "
i When the Long-period continuous shooting setting is specified, there are no restrictions on the
quality setting.
Using Long-period continuous shooting does not change the quality.
",
When Long-period continuous shooting is selected, the available quality settings are "
" "
If the quality setting is changed during Long-period continuous shooting, the quality setting remains
unchanged when normal photography is resumed.
When the quality setting before Long-period continuous shooting was set was "
i When Long-period continuous shooting is set, the quality setting is automatically reset to "
If the quality setting is not changed during Long-period continuous shooting, the quality reverts to the
setting selected before Long-period continuous shooting was selected when normal photography is
resumed.
Before setting of
Long-period continuous
shooting
If the quality setting is changed during Long-period continuous shooting, the quality setting remains
unchanged when normal photography is resumed.
Before setting of
Long-period continuous
shooting
N
", "
" or "
During Long-period After canceling of
continuous shooting Long-period continuous
shooting
After canceling of
During Long-period
continuous shooting Long-period continuous
(Quality setting changes) shooting
" or " "
", " " and
"
".
53