Frame No. (Frame Number Storage); Ccd-Raw; 5.1 The Software Components - FujiFilm FinePix S7000 Owner's Manual

SET-UP
FRAME NO. ( frame number storage )
CONT. RENEW
A A
B B
Formatted media used for both A and B.
１ ０ ０ − ０ ０ ０ ９ １ ０ ０ − ０ ０ ０ ９
Directory number
File number
Frame number
７ ４ ２ ０ ０ ３ １ ０ ： １ ０ Ａ Ｍ ７ ４ ２ ０ ０ ３ １ ０ ： １ ０ Ａ Ｍ

CCD-RAW

Setting CCD-RAW to ON disables the signal processing functions (reconstituting the data received
from the CCD as an image) performed on the camera. Consequently, this task must be performed
on the computer.
Use the bundled RAW FILE CONVERTER LE software to perform the processing on a computer.
Conversion using RAW FILE CONVERTER LE also provides a simple way to create TIFF-format
images.
✽ To rebuild images, FinePixViewer (on the bundled CD-ROM) must be installed on your computer.
I The functions listed below cannot be used in CCD-RAW mode.
Digital zoom, Continuous shooting, and FinePix Photo mode (image quality, sensitivity (ISO
During shooting
800) and FinePix COLOR) are unavailable.
Playback image quality is fixed at
During playback
Playback can be zoomed up to 400%, but cropped images cannot be saved.
88
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
CONT. : Pictures are stored beginning from the
highest file number stored on the last
media used.
RENEW: Pictures are stored on each media
beginning with a file number "0001".
Setting this function to "CONT." makes file
management easier as it ensures that file names
are not duplicated when images are downloaded to
a PC.
G
!
When the camera settings are " RESET", the frame number
setting ("CONT." or "RENEW") is changed to "CONT." and
the frame number itself does not return to "0001".
G
!
When the media already contains image files with file
numbers higher than the highest file number on the last
media, images are stored beginning from the highest file
number on the current media.
The file number can be checked by viewing the
image. The last 4 digits of the 7-digit number in the
top right corner of the screen are the file numbers,
while the first 3 digits show the directory number.
G
!
When changing the media, always turn the camera off before
opening the slot cover. Opening the slot cover without turning
the camera off, the Frame No. memory may not function.
G
!
File No. run from 0001 to 9999. Once 9999 is exceeded, the
directory number changes from 100 to 101. The maximum
number is 999–9999.
G
!
The displayed frame number may differ for images
photographed on other cameras.
G
!
When the " " message appears, see P.111.
(1280 × 960).
5 Software

5.1 THE SOFTWARE COMPONENTS

Installation
Connect the camera
with " "
selected as the USB
setting (➡P.100).
Exif Launcher
USB Mass Storage
Launches the FinePixViewer
Driver
software when a camera is
Allows a digital camera to be used
connected.
as USB Mass Storage (removable
disk drive, card reader).
FinePixViewer
Allows you to display thumbnail lists of the images stored on your PC or in the camera, print the images
individually or as an index, display the images at full size and perform some basic image processing.
PictureHello
Used for videoconferencing (Windows only).
ImageMixer VCD2
R R
Acrobat Reader
for FinePix
Creates a FinePix CD Album.
Software used to read PDF-
format documents on a
personal computer. This
software is needed to read
the User's Guides for
FinePixViewer (Mac OS 9
only).
✽ Note that the software configuration differs slightly depending on your operating system.
Connect the camera
with " PC" selected
as the USB setting.
USB PC Camera
Driver
Allows a digital camera to be
used as a PC Camera
(Windows/Mac OS 9 only).
RAW FILE
CONVERTER LE
Converts CCD-RAW files to
Exif-TIFF format.
89