Still Photography Menu; Photography Menu (Important. Please Read.); Photography Menu Operation; Quality Settings In Still Photography Mode - FujiFilm FinePix A120 Owner's Manual

STILL PHOTOGRAPHY MENU

PHOTOGRAPHY MENU ( Important. Please read. )

PHOTOGRAPHY MENU OPERATION

1
0 1 0 3
0 2
2
Ｎ ２０ Ｎ ２０
➡P.26
y Quality
Set the size of the recorded image when the
picture is taken. The size set is matched to the
intended use of the print size.
➡P.27
* Self-timer
Use this setting for taking pictures such as group
shots where the photographer is included in the
shot.
➡P.28, 40
q Shooting mode
a s r
Specify " " Auto, " " Manual or " " Movie.
y QUALITY SETTINGS IN STILL PHOTOGRAPHY MODE
ＱＵＡＬＩＴＹ ＱＵＡＬＩＴＹ
Ｆ １０ １０
Ｎ ２０ ２０ ＦＲＡＭＥＳ ＦＲＡＭＥＳ
２５ ２５
３３ ３３
Quality mode
Printing at A4 or A5 size or printing part of the image cropped at A6 size.
N (2016 × 1512)
3 3
F,
For better image quality, select "F".
(1600 × 1200)
2
Printing at A5 or A6 size.
(1280 × 960)
1 Printing at A6 size.
(640 × 480)
26 `
For an image attached to E-mail or used on a website.
1 Press the "MENU/OK" button to display the menu
on the LCD monitor.
2 Press "d" or "c" to select the menu item and
"a" or "b" to change the setting.
3 Press the "MENU/OK" button to confirm the
selection.
When you enable the setting, an icon appears in
the top-left corner of the LCD monitor.
●
!
The settings available in the menu screen vary depending on
the Still photography mode.
➡P.29
D EV
Set when the correct exposure cannot be obtained.
➡P.29
A White balance
Change this setting to take a picture with the white
balance fixed for the surroundings and lighting
when the picture is taken.
Choose from 5 settings. Using the table below as a
guide, select the setting that best suits the aims.
●
!
The numbers to the right of each setting show the number of
available frames.
●
!
When changing the quality setting, the number of available
frames also changes (➡P.79).
Sample Uses

* SELF-TIMER PHOTOGRAPHY

1
ＳＥＬＦ−ＴＩＭＥＲ ＳＥＬＦ−ＴＩＭＥＲ
ＯＮ ＯＮ
ＯＦＦ ＯＦＦ
Ｎ ２０ Ｎ ２０
2
Ｎ ２０ Ｎ ２０
Beep
3
4
8 8
The self-timer is used in situations where the
photographer is included in the shot.
*
Setting the self-timer to "ON", " " appears on the
LCD monitor.
In this mode, a timer runs for roughly 10 seconds
before the shutter is released.
●
!
The self-timer setting is cancelled in the following situations.
i When shooting ends
i When the camera is changed to"a" or "s" mode
i When the camera is set to Playback mode
i When the camera is turned off
Use the LCD monitor or viewfinder to frame your
shot. Then press the Shutter button to start the self-
timer.
●
!
Do not stand in front of the lens when pressing the Shutter
button. The image may not be in focus or get correct
brightness (exposure).
The self-timer lamp lights steadily for roughly 5
seconds and then blinks for another 5 seconds,
after which the picture is taken.
●
!
To stop the self-timer, once it has started running, press the
"DISP/BACK" button.
A countdown appears on the LCD monitor
indicating the time remaining until the picture is
taken.
Self-timer mode is cancelled after each shot.
3
27