3.
Install the:
a) drive cage
b) optical drive
c) front bezel
d) cover
4.
Follow the procedures in
Removing the Input/Output (I/O) Panel
1.
Follow the procedures in
2.
Remove the:
a) cover
b) front bezel
c) optical drive
d) drive cage
3.
Disconnect and un-thread the I/O panel/ FlyWire cable from the fan-shelter clip and heat sink.
4.
Remove the screw that secures the I/O panel to the chassis. Then, slide the I/O panel to the right to release and
remove from the computer.
22
After Working Inside Your Computer .
Before Working Inside Your Computer .