Installing The Front Bezel; Removing The Expansion Card - Dell Precision T1700 Owner's Manual

3. Pry the front bezel retention clips away from the chassis. Rotate the bezel away from the computer to release the
hooks on the opposite edge of the bezel from the chassis and remove it from the computer.

Installing the Front Bezel

1. Insert the hooks along the bottom edge of the front bezel into the slots on the chassis front.
2. Push the bezel toward the computer to engage the front bezel retention clips until they click into place.
3. Install the cover.
4. Follow the procedures in

Removing The Expansion Card

1. Follow the procedures in
2. Remove the cover
3. Rotate the release tab on the card-retention latch upward.
10
After Working Inside Your Computer .
Before Working Inside Your Computer .