Installing the Input/Output (I/O) Panel
1.
Insert the I/O panel into the slot on the chassis front.
2.
Slide the I/O panel to secure it to the chassis.
3.
Tighten the screw to secure the I/O panel to the chassis.
4.
Connect the I/O panel or FlyWire cable and audio cable to the system board.
5.
Thread the I/O panel or FlyWire cable into the fan-shelter clip.
6.
Install the:
a) drive cage
b) optical drive
c) front bezel
d) cover
7.
Follow the procedures in
Removing the Power Supply
1.
Follow the procedures in
2.
Remove the:
a) cover
b) front bezel
c) optical drive
d) drive cage
3.
Disconnect the 8-pin power cables from the system board.
4.
Disconnect the 4–pin power cables from the system board.
After Working Inside Your Computer .
Before Working Inside Your Computer .
23