Removing The Memory; Installing The Memory; Removing The System Fan - Dell Precision T1700 Owner's Manual

Small form factor
Hide thumbs Also See for Precision T1700:
Table of Contents

Advertisement

If memory modules with different speeds are installed, they operate at the speed of the slowest installed
memory modules.

Removing the Memory

1.
Follow the procedures in
2.
Remove the cover.
3.
Press down on the memory retaining tabs on each side of the memory modules, and lift the memory modules out of
the connectors on the system board.

Installing the Memory

1.
Align the notch on the memory-card with the tab in the system-board connector.
2.
Press down on the memory module until the release tabs spring back to secure them in place.
3.
Install the cover.
4.
Follow the procedures in

Removing the System Fan

1.
Follow the procedures in
2.
Remove
a) cover
b) optical drive
c) drive cage
d) front bezel
3.
Disconnect the system-fan cable from the system board.
Before Working Inside Your Computer .
After Working Inside Your Computer .
Before Working Inside Your Computer .
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents