Dell Precision T1700 Owner's Manual page 39

Option
Table 9. Virtualization Support
Option
Virtualization
VT for Direct I/O
Trusted Execution
Table 10. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
Table 11. Cloud Desktop
Option
Server Lookup Method
Server IP Address
Server Port
Description
• Enable MEBx Hotkey — This option is enabled by default
Description
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the
additional hardware capabilities provided by Intel Virtualization technology.
• Enable Intel Virtualization Technology - This option is enabled by default.
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional
hardware capabilities provided by Intel® Virtualization technology for direct I/O.
• Enable Intel Virtualization Technology for Direct I/O - This option is enabled
by default.
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can
utilize the additional hardware capabilities provided by Intel Trusted Execution
technology. The TPM virtualization technology, and Virtualization technology for
direct I/O must be enabled to use this feature.
• Trusted Execution - This option is disabled by default.
Description
Displays the service tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set. This option
is not set by default.
Controls the SERR message mechanism. This option is not set by default. Some
graphics cards require that the SERR message mechanism be disabled.
Description
Specifies how the ImageServer looks up the server address.
• Static IP
• DNS (enabled by default)
NOTE: This field is only relevant when the
Configuration group is set to Enabled with ImageServer .
Specifies the primary static IP address of the ImageServer with which the client
software communicates. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the
Configuration group is set to Enabled with ImageServer and when Lookup
Method is set to Static IP .
Specifies the primary IP port of the ImageServer, which is used by the client to
communicate. The default IP port is 06910.
Integrated NIC control in the System
Integrated NIC control in the System
39