Installing the 5.25 ODD bay
1
Place the ODD bracket into the system slot.
2
Replace the (6-32 X 6.0mm) screws.
3
Place the ODD filler back into the slot.
4
Install the:
a
front bezel
b
side cover
5
Follow the procedure in
Front input and output panel
Removing front input and output panel
1
Follow the procedure in
2
Remove the:
a
side cover
b
front bezel
c
front input and output bezel
d
5.25 inch ODD bracket
After working inside your computer
Before working inside your
computer.
Removing and installing components
27