Using The Osd; Accessing The Menu System - Dell 2405FPW - UltraSharp - 24" LCD Monitor User Manual

Adjust Brightness first, then adjust Contrast only if further adjustment is necessary.
1. Navigate to the Brightness control function
2. Select using
Brightness / Contrast
3. Push the
push the
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
1. Navigate to the Contrast control function
2. Select using
3. Push the
push the
NOTE:
E Use this button to activate automatic setup and adjustment. The following dialog will appear on a black screen as the monitor self-
adjusts to the current input:
Auto Adjust
Auto Adjustment
further tune your monitor by using the Pixel Clock, Phase controls in the OSD.
NOTE:
F The green LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.
The Power button turns the monitor on and off.
Power Button &
Indicator

Using the OSD

Accessing the Menu System

1. With the menu off, push the MENU button to open the OSD system and display the main features menu.
key.
button to increase Brightness;
button to decrease Brightness (min 0 ~ max 100).
key.
button to increase the contrast;
button to decrease the contrast (min 0 ~ max 100).
When using '2: DVI-D Input', the contrast adjustment is not available.
Auto Adjust In Progress
button allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can
Auto Adjust does not occur if you press the button while there are no active video input signals, or attached cables.