Dell 2405FPW - UltraSharp - 24" LCD Monitor User Manual page 20

- PIP size : To adjust the size of the PIP screen between "Small","Medium", and "Large".
Use
- Position : Move the PIP window.
Use
- Advanced Menu : To adjust the detail menu of PIP Setting. See
Use
PBP Settings:
Pressing PIP/PBP
The details of the menu is as follows:
- PBP Source : To select an input signal for PBP. (VGA/DVI/Svideo/Composite/Component)
Use
the right hand side.
- Swap : To switch the main-screen and sub-screen in PBP mode.
Use
- Advanced Menu : To adjust the detail menu of PIP Setting. See
Use
C The MENU button is used to open the on-screen display(OSD) and select the OSD Menu. See
OSD menu & select
D, Use these buttons for navigating and adjusting the slider-bar(decrease/increase ranges) controls in the OSD.
E
Minus (- ) and Plus (+)
D Use this button to activate Brightness/Contrast adjustment.
With the Menu off, push the
and to choose and to select.
and to choose and to select.
to select.
for the second time in sequence(PIP->PBP) will open "PBP Settings" Menu.
and to choose and to select. The PBP active sub-screen is shown with "blue border" beside the main-screen on
and to choose and to select.
to select.
button to display the Brightness/Contrast adjustment menu.
PIP/PBP Settings.
PIP/PBP Settings.
Accessing the Menu System.