When the cable is connected back to the input of the monitor, any active PIP/PBP window will disappear. Please press PIP/PBP select key
When the monitor does not sense the selected video input, one of the following messages will appear depending upon the selected input as long as you press any button other than power button.
Occasionally, no warning message appears, but the screen is blank: this could also indicate that the monitor is not synchronizing with the computer or the monitor is in a power save mode.
In PIP/PBP mode, when the monitor does not sense the selected second signal input, one of the following messages will appear depending upon the selected input as long as the OSD screen is closed.
1. VGA
No input signal
No Cable
1: D-SUB
Can not display this mode
See
Solving Problems
for more information.
Using the Dell™ Sound Bar (Optional)
The Dell™Sound Bar is a four-speaker, two-channel system adaptable to mount on Dell™ Flat Panel Displays. The Sound Bar has a rotary volume and on/off control to adjust the overall system level, a green LED for