Using The Osd Menu - Dell 1708FP User Manual

Auto Adjust
Auto Adjustment
you can further tune your monitor by using the Pixel Clock (Coarse), Phase (Fine) controls in the OSD.
Use the power button to turn the monitor on and off.
The green light indicates the monitor is on and fully functional. An amber light indicates power save mode.
Power Button and Indicator

Using the OSD Menu

NOTE: If you change the settings and then either proceed to another menu, or exit the OSD menu, the monitor automatically saves those changes. The changes are also
saved if you change the settings and then wait for the OSD menu to disappear.
1. Push the MENU button to open the OSD menu and display the main menu.
Main Menu for Auto Detect Analog (VGA) Input
button allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment,
NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached
cables.
or
Main Menu for Auto Detect Digital (DVI) Input