Playback In Zone2 - Marantz SR6008 Owner's Manual

Contents Connections

Playback in ZONE2

ZONE2
Input source
select buttons
MUTE
Front panel Display
Playback
1
2
POWER
X
3
VOLUME df
2 Adjusting the volume
133
Rear panel
Settings Tips
Press ZONE2 to switch the zone mode to the ZONE2.
Press POWER X to turn on the ZONE2 power.
The ZONE2 power indicator on the display lights (vpage 15).
• Also press input source select button when in standby mode, the
power turns on.
• When POWER X is pressed, ZONE2 turns off.
• Power in ZONE2 can be turned on or off by pressing ZONE2 ON/
OFF on the main unit.
Press the input source select button to select the input
source to be played.
The audio signal of the selected source is output to ZONE2.
• Turn INPUT SELECTOR after pressing ZONE2 SOURCE on the
main unit to select an input source.
Use VOLUME df to adjust the volume.
• At time of purchase, "Volume Limit" (vpage 184) is set to "70
(–10dB)".
%
• Turn VOLUME after pressing ZONE2 SOURCE on the main unit to adjust the
sound volume.
Remote Index
Appendix