Marantz SR6008 Owner's Manual page 139

Contents
2 Speakers
Setting items
Audyssey ® Setup
Manual Setup
Amp Assign
Speaker Config.
Distances
Levels
Crossovers
Bass
Front Speaker
2 Network
Setting items
Information
IP Control
Friendly Name
Settings
Diagnostics
Maintenance Mode
Front panel Display
Connections Playback
The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made
automatically.
Perform when setting the speakers manually or when changing settings made in Audyssey® Setup.
Select power amplifier usage method to match your speaker system.
Indicate speaker presence and select speaker size categories based on bass reproduction capability.
Set distance from listening position to speakers.
Set the volume of the test tone to be the same when it is output from each speaker.
Set the maximum frequency of the bass signal output from each channel to the subwoofer.
Set subwoofer and LFE signal range playback.
Set the front speakers to use for every sound mode.
Display network information.
Enables network communication in standby power mode.
The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your
preferences.
Make settings for wired LAN.
Used to check the network connection.
Use when receiving maintenance from a Marantz service engineer or custom installer.
Rear panel
Settings
Description
Description
139
Remote
Tips Appendix
Index
Page
164
173
173
174
176
176
177
178
178
Page
179
179
179
180
181
182