Auto Standby; Front Display; Information - Marantz SR6008 Owner's Manual

Contents

Auto Standby

When you do not perform any operation on this unit with no audio or video
input for a specified time, this unit automatically enters the standby mode.
Before it enters the standby mode, "Auto Standby" is displayed on the
display of this unit and the menu screen.
60 min : The unit goes into standby after 60 minutes.
30 min : The unit goes into standby after 30 minutes.
Off (Default) : The unit does not go into standby automatically.

Front Display

2 Display
Select the front display mode.
On : Display is always on.
Auto Off : Display is off except when showing the status display.
Off : Display is always off.
%
• This can be set by pressing DISPLAY on the main unit.
Front panel Display
Connections Playback
Rear panel
Settings

Information

Show information about receiver settings, input signals, etc.
2 Audio
Show the audio information for MAIN ZONE.
Sound Mode : The currently set sound mode.
Input Signal : The input signal type.
Format : The number of input signal channels (presence of front,
surround, LFE).
Sample Rate : The input signal's sampling frequency.
Offset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround
back channel. "MATRIX" is displayed with Dolby Digital EX
and DTS-ES Matrix signals, "DISCRETE" with DTS-ES Discrete
signals.
Dialogue normalization function
This function is automatically activated when playing Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD sources.
It automatically corrects the standard signal level for individual
program sources.
The correction value can be checked using the STATUS on the main
unit.
The figure is the corrected value. This cannot be changed.
186
Remote
Tips Appendix
Index