Resetting Factory Settings; Appendix - Marantz SR6008 Owner's Manual

Contents

Resetting factory settings

Perform this procedure if the display is abnormal or if operations cannot be performed.
Note that when you perform this operation, various settings are reset to their default values and setup will need to be performed again.
ZONE2 SOURCE
X
M-DAX
Front panel Display
Connections Playback
Rear panel
Settings
1
Turn off the power using X.
2
Press X while simultaneously pressing ZONE2 SOURCE
and M-DAX.
3
Once the display starts flashing at intervals of about 1
second, release the two buttons.
%
• If in step 3 the display does not flash at intervals of about 1 second, start over
from step 1.
208
Remote
Tips

Appendix

Index