Listening To Fm/Am Broadcasts - Marantz SR5008 Owner's Manual

Contents

Listening to FM/AM broadcasts

1
Press TUNER to switch the input source to "TUNER".
TUNER
CH 1
Tune
TUNE+/-
GDisplay of this unitH
2
Press OPTION.
The option menu screen is displayed.
3
Use ui to select "FM/AM", then press ENTER.
4
Use o p to select "FM" or "AM", then press ENTER.
FM : When listening to an FM broadcast.
AM : When listening to an AM broadcast.
Front panel Display
Connections Playback
GTV ScreenH
STEREO AUTO
Now Playing
FM 92.10MHz
Preset Option
CH / OPTION
Rear panel
Settings
5
Press TUNE + or TUNE – to select the station you want
to hear.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
%
• The modes for receiving FM broadcasts consists of "Auto" mode that automatically
searches available broadcast stations and "Manual" mode that lets you tune in
using buttons to change the frequency. The default setting is "Auto". You can also
use "Direct Tune" to tune in by entering the frequency directly.
In "Auto" mode, you cannot tune in to radio stations if the reception is not good. If
this is the case, then use the "Manual" mode or "Direct Tune" to tune in.
Operation buttons
TUNE +, –
CH/PAGE df
FAVORITE STATION
1 – 3
62
Remote
Tips Appendix
Function
Tuning (up/down)
Preset channel selection
Call up favorite stations
(Press and hold)
Add to the favorite stations
Index