Marantz SR5008 Owner's Manual page 30

Contents
2 About the Bi-amp connection
Some audiophile loudspeakers can be connected to an amplifier with two separate amp-to-speaker connections per each speaker. One amplifier
channel's output is hooked up to the speaker's bass driver (woofer), while the other amplifier drives the upper range transducers (tweeter, or in
some cases midrange and tweeter). This connection method has one amplifier channel driving one half of the bi-amp speaker, and avoids electrical
interference between the speaker's bass and treble drivers and the driving amplifier channels. You can assign 4 amp channels to connect to one pair
of bi-amp capable speakers. Bi-amp capable speakers always have two sets of speaker input connector pairs, one for the bass range and one for
the treble range. If you're unsure about whether or not your speakers are bi-amp capable, consult the owner's manual that came with the speakers.
• For how to connect the center, and surround speaker and the subwoofer to this unit, see "Connecting 7.1-channel speakers using surround back
speakers" (vpage 28).
(R)
SW
q w
Front panel Display
Connections Playback
q
FR FL
Rear panel
Settings
(L)
%
• When using this connection, also set "Assign Mode" in the menu to
w
"Bi-AMP" (vpage 167).
NOTE
• When making bi-amp connections, be sure to remove the short-circuiting
plate or wire between the speaker's woofer and tweeter terminals.
30
Remote
Tips Appendix
Index