Marantz SR5008 Owner's Manual page 135

Contents
2 Network
Setting items
Information
IP Control
Friendly Name
Settings
Diagnostics
Maintenance Mode
2 General
Setting items
Language
ZONE2 Setup
Lch Level
Rch Level
Volume Level
Volume Limit
Power On Volume
Mute Level
Zone Rename
Auto Standby
Front Display
Front panel Display
Connections Playback
Display network information.
Enables network communication in standby power mode.
The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your
preferences.
Make settings for wired LAN.
Used to check the network connection.
Use when receiving maintenance from a Marantz service engineer or custom installer.
Sets the language for display the menu on the TV screen.
Makes settings for audio playback in a ZONE2 system.
Adjust the left channel output level.
Adjust the right channel output level.
Set the volume output level.
Make a setting for maximum volume.
Define the volume setting that is active when the power is turned on.
Set the amount of attenuation when muting is on.
Change the display title of each zone to one you prefer.
When you do not perform any operation on this unit with no audio or video input for a specified time, this unit automatically
enters the standby mode. Before it enters the standby mode, "Auto Standby" is displayed on the display of this unit and the
menu screen.
Makes settings related to the display on this unit.
Rear panel
Settings
Description
Description
135
Remote
Tips Appendix
Index
Page
173
173
173
174
175
176
Page
177
177
177
177
177
178
178
178
178
179
179