Dial-Code Features - AT&T MLS-34D Manual

Dial-Code Features

Dial-Code Feature
Account Code Entry
Use to enter an account code of up to 16 digits
for an outside call (incoming or outgoing). If
programmed on a button with lights, button light
is on when this feature is in use. You may have
to enter an account code before you can access
an outside line (see panel 9).
Call Forwarding/Call Follow-Me
Forwards your calls to another extension. (To
cancel Call Forwarding, enter your extension
number as the destination.) If programmed on a
button with lights, button light is on when this
feature is on. Unless Do Not Disturb is on,
phone beeps once each time a call is
forwarded.
Call Pickup
Picks up a call ringing at any system extension.
To program this feature on a button, include the
extension number.
Conference Drop
Drops the last outside party added to a
conference call.
Direct Line Pickup—Active Line
Lets you access a ringing, held, or active call on
a line that is not on your phone.
Direct Line Pickup—Idle Line
Lets you access an idle line that is not on your
phone. For example, if your company has a
dedicated WATS line that is not assigned to a
button on your phone, use this feature to access
the line.
Do Not Disturb
Prevents calls from ringing at your phone.
Transferred calls return to sender, inside calls
get a busy signal; outside callers hear ringing.
Recommended only if someone else answers
your outside calls. To use, program [
[ ] on a button with lights (light is on when
1
feature is on).
Exclusive Hold
Places a call on hold so other extensions cannot
pick it up.
Can use this feature only if programmed onto a button with lights (see panel 4).
Button with lights recommended (not required).
To Dial
Manually
Dial [ ] [
Feature
the account code, then
[ ] [ ] [
Feature 1 2
[ ] [ ] [
Feature 1
+ Your Extension Number
+ Destination Extension
Number
[ ] [ ]
Intercom 6
+ Extension Number
Dial [ ] [
Feature
[ ] [ ] [
Intercom 6
+ Line Number (01–12)
[ ] [ ]
Intercom 8
+ Line Number (01–12)
Not available
] [ ]
Feature 0
Dial [ ] [
Feature
5
To Use On a
Button
] [ ], Press the button,
1 2
dial the account code,
then press the button
] again
again.
]
Press the button +
1
Your Extension
Number +
Destination Extension
Number
Press the button
Press the button
] [ ]
0 6
Press the button +
]
8
Line Number (01–12)
Press the button +
Line Number (01–12)
Press the button
to turn on and off
Press the button
] [ ]
0 2