Graphics Card - HP XT905UT Maintenance And Service Manual

Graphics card

NOTE: All graphics card spare part kits include replacement thermal material.
Description
NVIDIA NVS 5100 graphics card
NVIDIA Quadro FX 880 graphics card
NVIDIA Quadro FX 1800 graphics card
ATI FirePro M5800 graphics card
Before removing the graphics card, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Keyboard (see
b. Switch cover (see
c. Fan (see
d. Heat sink (see
Remove the graphics card:
1. Position the computer right-side up, with the front toward you.
2. Remove the two Phillips PM2.5×3.0 screws (1) that secure the graphics card to the computer.
(The edge of the board opposite the graphics card slot rises away from the computer.)
Battery on page
Keyboard on page
Switch cover on page
Fan on page 73)
Heat sink on page
47).
65)
71)
75)
Component replacement procedures
Spare part number
595820-001
595821-001
595822-001
595823-001
79