Graphics Card - HP EliteBook 8570w Maintenance And Service Manual

Graphics card

NOTE:
All graphics card spare part kits include replacement thermal material.
Description
NVIDIA Quadro K2000M (NVIDIA N14P-Q3 2GB DDR3)
NVIDIA Quadro K1000M (NVIDIA N14P-Q1 2GB DDR3)
AMD FirePro M4000 (Chelsea XT GL 1GB GDDR5)
Before removing the graphics card, follow these steps:
IMPORTANT:
and replacement.
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the service door (see
6.
Remove the following components:
a.
Hard drive (see
b.
Upgrade bay device (see
c.
Keyboard (see
d.
Top cover (see
e.
Fan and heat sink assembly (see
Remove the graphics card:
1.
Position the computer right-side up, with the front toward you.
2. Remove the two Torx 8 screws (1) that secure the graphics card to the computer. (The edge of the
board opposite the graphics card slot rises away from the computer.)
102 Chapter 4 Removal and replacement procedures
Make special note of each screw and screw lock size and location during removal
Battery on page
Service door on page
Hard drive on page
Upgrade bay device on page
Keyboard on page
Top cover on page
54).
60)
72).
81).
87).
Fan and heat sink assembly on page
Spare part number
690637-001
690638-001
690639-001
77).
100).