Hard Drive - HP XT905UT Maintenance And Service Manual

Hard drive

NOTE: All hard drive spare part kits include a hard drive bracket and screws.
Description
500-GB, 7200-rpm hard drive
320-GB, 7200-rpm hard drive
250-GB, 7200-rpm hard drive
256-GB solid-state drive (SSD)
160-GB solid-state drive (SSD)
Before disassembling the computer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the hard drive:
1. Position the computer upside-down, with the front toward you.
2. Loosen the four Phillips PM2.0×7.0 captive screws (1) that secure the hard drive cover to the
computer.
54 Chapter 4 Removal and replacement procedures
Battery on page 47).
Spare part number
595755-001
595754-001
595753-001
595756-001
595757-001