To Insert Or Remove A Cd Or Dvd - HP OmniBook 6100 - Notebook PC Manual

CAUTION

To insert or remove a CD or DVD

Do not remove a CD or DVD while the computer is reading it. Otherwise, the
computer could stop responding and you could lose data.
Be sure to press the CD or DVD onto the spindle. You can damage the disk or
drive if you just lay it on the tray.
1. Press the button on the face of the CD-ROM or DVD drive. If you are using this drive
for the first time, be sure to remove the cardboard packing insert.
2. Place the CD into the drive (label facing up) and gently press down to seat it on the
spindle.
–or–
Remove the CD.
3. Slide the tray back into the module to close it.
If your computer loses power, or if you have removed the CD-ROM or DVD module
from the computer, you can manually open the drive to remove a CD. Insert a
straightened paper clip into the recessed hole on the front of the drive to open it.
Add-On Devices
Using Plug-In Modules
Corporate Evaluator's Guide 77