Table of Contents
Advertisement
SETTING UP BUTTON MANAGER
Button Manager is a software program that works with the scanner driver to enable scanning from the operation
panel of the machine.
To scan using the operation panel of the machine, Button Manager must be linked with the scan menu keys on the
machine. Follow the steps below to link Button Manager to scanner events.
Windows XP
1
Click the "start" button, click "Control
Panel", click "Printers and Other
Hardware", and then click "Scanners
and Cameras".
2
Click the "SHARP AL-XXXX" icon and
select "Properties" from the "File"
menu.
3
In the "Properties" screen, click the
"Events" tab.
4
Select "ScanMenu SC1" from the
"Select an event" pull-down menu.
12
5
Select "Start this program" and then
select "Sharp Button Manager D" from
the pull-down menu.
6
Click the "Apply" button.
7
Repeat Steps 4 through 6 to link
Button Manager to "ScanMenu SC2"
through "ScanMenu SC6".
Select "ScanMenu SC2" from the "Select an
event" pull-down menu. Select "Start this
program", select "Sharp Button Manager D" from
the pull-down menu, and then click the "Apply"
button. Do the same for each ScanMenu through
"ScanMenu SC6".
When the settings have been completed, click the
"OK" button to close the screen.
Button Manager is now linked to the scan menu keys
(1 through 6).
The scan settings for each of scan menu keys 1
through 6 can be changed in the setting window of
Button Manager.
For the factory default settings of the scan menu keys,
see "USING THE SCANNER MODE" in the Operation
Manual. For the procedures for configuring Button
Manager settings, see "Button Manager Settings" in
the Online Manual.
Advertisement
Table of Contents
