Dpof Set Frame - FujiFilm 30i Owner's Manual

DPOF SET FRAME

PLAYBACK MENU
1
0 1 0 3
You can only specify one print per frame (image)
in the DPOF settings.
1Press the "MENU/OK" button to display the
menu.
2Use "d" or "c" to select " DPOF".
3With "EXECUTE" selected, press the "MENU/
OK" button.
G
!
The DPOF menu is not displayed when a movie or
voice file is selected.
G
!
You cannot specify printing for more than one print
66
per frame.
2
2 0
1If you select a frame for which DPOF settings
have already been specified,
" " message appears.
2Pressing the "MENU/OK" button erases all
the DPOF settings already specified. You
must then specify the DPOF settings again.
G
!
Press the "BACK" button to leave the previous
settings unchanged.
G
!
You can check the previous settings by playing back
the images (➡P.30).
3 3
0 1 0 1
0 2
1 Use "d" or "c" to display the frame for which you
want to specify DPOF settings.
the
2 Use "a (
)" or "b ( )" to select the setting for the
frame to be printed. You can check the frames for which
the date/time has been set from the "
appears when frames with the setting are redisplayed.
G
!
DPOF settings cannot be specified for movies.
G
!
Note that the " " icon is not displayed during playback.
G
!
"TOTAL" shows the total number of frames for which prints
have been ordered.
To specify more DPOF settings, repeat steps
4
2 0
When you have finished specifying the DPOF
settings, always press the "MENU/OK" button to
confirm the settings.
If you press the "BACK" button, no DPOF
settings are specified.
G
!
" icon that You can only specify one print per frame in the
DPOF settings. Note also that you can specify prints
for up to 999 frames on the same SmartMedia.
Pressing the "MENU/OK" button confirms all the
To specify additional DPOF settings, repeat
settings. Note that you cannot change the
steps 1 and 0 2 and select "SET" for the frames 0
settings later (➡P.66).
0 1 and 0 2 . to be printed.
4
67