Setting The Date And Time - FujiFilm 30i Owner's Manual

SETTING THE DATE AND TIME

1
1 0 0 3
1Press the "MENU/OK" button to display the
menu screen.
2Use " " or " " to select " OPTION", and then
d c
use " ( )" or " ( )" to select "SET–UP".
a b
3Press the "MENU/OK" button.
If the date was cleared and you selected "
3
proceed from step (➡P.21).
20
2
2 0 1 0
1The "SET–UP" screen appears. Use "
or " ( )" to select "DATE/TIME".
b
2Press "c".
G
!
See P.78 for more information on the "
menu.
G
!
If at least 10 minutes have passed since the AC power
adapter was connected or the batteries inserted and
date and time set, then those settings will be
maintained for roughly 12 hours even when the camera
",
has no power supply (when the AC power adapter is
disconnected and the batteries are removed).
3
2 0 0 1
( )" 1Use "d" or "c" to select the desired item and then
a
use "a ( )" and "b (
2When you have finished setting the date and time,
press the "MENU/OK" button to confirm the setting.
OPTION"
G
!
If you hold down "a (
change continuously.
G
!
When the time displayed passes "12:00:00", the
AM/PM setting automatically switches.
G
!
You cannot set the seconds. To set the time
precisely, press the "MENU/OK" button when the
time signal reaches zero.
4 4
2 0
The "SET–UP" screen reappears. Press the
"MENU/OK" button to complete the settings.
)" to correct the setting.
G
!
The appearance of the date/time setting screen may
)" or "b ( )", the numbers
differ. 2001 .01.01.
If the date was cleared and you selected "
the camera switches to Still image, Audio/Movie or
playback mode without returning to the "SET–UP"
screen.
1
",
21