How To Specify Print Options (Dpof); Dpof Date Setting - FujiFilm 30i Owner's Manual

HOW TO SPECIFY PRINT OPTIONS ( DPOF )
PLAYBACK MENU
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
SmartMedia. The recorded specifications include information on which frames are to be
printed.
This section gives a detailed description of how to order your prints with the FinePix30i.
On the FinePix30i, you can specify only one print per image in the DPOF settings.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
(➡P.101)
If the " " message appears, you cannot erase the frame. Cancel the "DPOF"
settings and then try again.
(➡P.101)
Up to 999 frames can be specified on the same SmartMedia.
64

DPOF DATE SETTING

PLAYBACK MENU
1
0 1
This function allows you to select whether or not
the date of shooting is included on the print.
1Press the "MENU/OK" button to display the
menu on the LCD monitor.
2Use "d" or "c" to select " DPOF".
G
!
The DPOF menu is not displayed when a movie or
voice file is selected.
G
!
You may not be able to specify DPOF settings for
some still shots taken on other cameras.
2
2 0 0 1
1Use "b ( )" to select " DATE".
2Use "d " or "c " to specify "DATE ON" or
"DATE OFF". The selected setting is then valid
for all frames with DPOF settings until the
camera is switched off.
Then specify the DPOF settings (➡P.66).
G
!
You must specify whether or not the date is included
before you specify the DPOF settings.
2 0
4
65