Ev (Exposure Compensation); White Balance (Selecting The Light Source) - FujiFilm 30i Owner's Manual

EV ( EXPOSURE COMPENSATION )
PHOTOGRAPHY MENU
This mode can be selected in the "
image mode.
Use the Brightness setting to obtain the optimum
image brightness (exposure) when the subject is
much brighter or darker than the background.
hCorrection range: 11 steps
(–1.5 EV to +1.5 EV in 0.3 EV increments)
See P.108 for information on EV.
G
!
The Brightness setting is disabled in the following
situations:
i When the flash is used in Auto or Red-Eye
Reduction mode.
46 i When dark scenes are shot in Forced Flash mode.
N
Subjects for Which Exposure
Adjustment is Particularly Effective
Guide to using + (positive) compensation
h Copying of printed text (black characters on
white paper) (+1.5 EV)
h Backlit portraits (+0.6 EV to +1.5 EV)
h Very bright scenes (such as snowfields) and
highly reflective subjects (+0.9 EV)
h Shots made up predominantly of sky
" still
(+0.9 EV)
Guide to using – (negative) compensation
h Spotlit subjects, particularly against dark
backgrounds (–0.6 EV)
h Copying of printed text (white characters on
black paper) (–0.6 EV)
h Scenes with low reflectivity, such as shots of
pine trees or dark foliage (–0.6 EV)
PHOTOGRAPHY MENU
N
This mode can be selected in the "
image mode.
In Auto mode, the correct white balance may not
be obtained for subjects such as close-ups of
people's faces and shots taken under a special
light source.
Change the white balance setting when you
want to take a picture with the correct balance.
See P.109 for more information on the white
balance.
WHITE BALANCE ( SELECTING THE LIGHT SOURCE )
AUTO: Automatic adjustment
(Shooting to show the ambience of the
light source)
: Shooting outdoors in fine weather
: Shooting in shade
: Shooting under "Daylight" fluorescent
lamps
: Shooting under "Warm White" fluorescent
lamps
" still
: Shooting under "Cool White" fluorescent
lamps
: Shooting in incandescent light
✽ The white balance setting is ignored when the flash is
used. To achieve the desired effect in your shot, set
the flash to Suppressed Flash mode (➡P.40).
3
47