Input Signal Source; Input Select - Sharp LC-30AD1E Operation Manual

Useful adjustment settings

Input signal source

Input selection
Can use for selecting the input source.
1
Press b on the remote control unit or
INPUT on the Display.
• INPUT SOURCE menu displays.
2
Press b on the remote control unit or
INPUT on the Display to select the input
source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
Input signal setting
For setting the signal type of external equipment.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
• Option menu displays.
3
Press a/b to select "Input Select", and then
press OK.
[ Option ... Input Select ]
MENU
Option

Input Select

Input Label
Audio Out
Cool Climate
Colour System
LC-30AD1E(E)-h
[Fixed]
[On]
[AUTO]
73
4
Press a/b/c/d to select a signal type you
want to set, and then press OK.
• If the selected signal type is incorrect, an image
does not display or no colour image displays.
For INPUT 1 signal
[Option ... Input Select]
MENU
CVBS
For INPUT 2 signal
[Option ... Input Select]
MENU
Y/C
For INPUT 3 signal
[Option ... Input Select]
MENU
COMPONENT
For INPUT 4 signal
[Option ... Input Select]
MENU
S-Video
NOTE
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment
for the signal type.
03.10.31, 1:26 PM
RGB
CVBS
Y/C
CVBS
RGB
AUTO
Video
73