Sharp LC-30AD1E Operation Manual

Lcd colour television
Table of Contents

Advertisement

This equipment complies with the requirements of Directive 89/336/EEC and 73/23/EEC as amended by 93/68/
EEC.
Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/
68/EWG.
Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la
directive 93/68/CEE.
Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/EEG.
Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillæg nr. 93/68/EEC.
Quest' apparecchio è conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC, come emendata dalla
direttiva 93/68/EEC.
« „ͷًÛÙ·ÛÁ ·ıÙfi ·ÌÙ·ÔÍÒflÌÂÙ·È ÛÙÈÚ ··ÈÙfiÛÂÈÚ Ù˘Ì Ô‰Á„È˛Ì ÙÁÚ EıÒ˘·˙ÍfiÚ EÌ˘ÛÁÚ 89/336/EOK Í·È
73/23/EOK, ¸˘Ú ÔÈ Í·ÌÔÌÈÛÏÔfl ·ıÙÔfl ÛıÏÎÁÒ˛ËÁÍ·Ì ·¸ ÙÁÌ Ô‰Á„fl· 93/68/EOK.
Este equipamento obedece às exigências das directivas 89/336/CEE e 73/23/CEE, na sua versão corrigida pela
directiva 93/68/CEE.
Este aparato satisface las exigencias de las Directivas 89/336/CEE y 73/23/CEE, modificadas por medio de la
93/68/CEE.
Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/EEC och 73/23/EEC så som kompletteras av 93/68/
EEC.
Dette produktet oppfyller betingelsene i direktivene 89/336/EEC og 73/23/EEC i endringen 93/68/EEC.
Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 93/68/EEC.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should
the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked
as above, which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the
mains plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of
in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious
electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
• The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
• The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.
Before replacing the plug cover make sure that:
• If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
• The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
LC-30AD1E(E)(CE/UK)
SPECIAL NOTE FOR USERS IN THE U.K.
1
or
and of the same rating
ASA
03.10.31, 1:43 PM

Advertisement

Table of Contents
loading

Summary of Contents for Sharp LC-30AD1E

  • Page 1 • If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug. • The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires. IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN. LC-30AD1E(E)(CE/UK) 03.10.31, 1:43 PM...
  • Page 2: Table Of Contents

    LCD COLOUR TELEVISION ENGLISH OPERATION MANUAL Contents Contents …………………………………………………… 1 Found TV services …………………………………… 35 Dear SHARP customer …………………………………… 3 Found radio services ………………………………… 35 Important Safety Precautions ………………………… 3 Store …………………………………………………… 36 Supplied accessories …………………………………… 6 Discard ………………………………………………… 36 Preparation …………………………………………………...
  • Page 3 Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. LC-30AD1E(E)-a 03.10.31, 1:14 PM...
  • Page 4: Dear Sharp Customer

    Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble- free operation of your product, please read the Important Safety Precautions carefully before using this product. Important Safety Precautions Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.
  • Page 5 • To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items. • To prevent fire, never place any type of candle or naked flames on the top or near the TV set. LC-30AD1E(E)-a 03.10.31, 1:14 PM...
  • Page 6 Precautions when transporting the Display When transporting the Display, never carry it by holding onto the speakers. Be sure to always carry the Display by two people holding it with two hands—one hand on each side of the display. LC-30AD1E(E)-a 03.10.31, 1:14 PM...
  • Page 7: Supplied Accessories

    System cable (g1) AC cord (g2) Product shape varies in some countries. Page 8 Page 8 Antenna cable (g1) Operation manual Stand (g1) LC-30AD1E Stand cushion (g4) Stand spacer (g4) Stand screw (g2) Page 11 Page 13 LC-30AD1E(E)-a 03.10.31, 1:15 PM...
  • Page 8: Preparation

    10 cm or more Keep enough space 5 cm or more 5 cm or more on both sides There is an exhaust fan on the right side. LC-30AD1E(E)-a 03.10.31, 1:15 PM...
  • Page 9: Setting The System

    Connecting the system cable and the AC cord to the AVC System System cable (WHITE) (BLACK) (GREY) AVC System (rear view) AC cord CAUTION • TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED. LC-30AD1E(E)-a 03.10.31, 1:15 PM...
  • Page 10 Display leg attach as shown. as shown. Display (rear view) Arrange the system cable as shown in the illustration. Closing the terminal cover Cables come out from the small opening. LC-30AD1E(E)-a 03.10.31, 1:15 PM...
  • Page 11: Removing The Stand And Speaker

    • The speaker terminals on the Display are only for the attached speaker. Do not connect any third party plug or speaker to the terminal. • Insert the speaker plug completely into the terminal. NOTE • To attach the speaker and stand, perform the above steps in reverse order. LC-30AD1E(E)-a 03.10.31, 1:15 PM...
  • Page 12: Setting The Display On The Wall

    • Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
  • Page 13: Inserting The Batteries

    • The remote control unit may not work properly if the remote sensor window of the Display is under direct sunlight or strong lighting. In such case, change the angle of the lighting or Display, or operate the remote control unit closer to the remote sensor window. LC-30AD1E(E)-a 03.10.31, 1:15 PM...
  • Page 14: Basic Connection

    • Always turn off the main power of Display and AVC System when connecting the AC cords. • Disconnect the AC cords from the AC outlet, Display and AVC System if the System will not be used for a long period of time. LC-30AD1E(E)-a 03.10.31, 1:15 PM...
  • Page 15: Initial Auto Installation

    You do not need to do anything during the auto search. (Go to the next page.) NOTE • The illustrations and on-screen displays in this manual are for explanation purposes and may vary slightly from the actual operations. LC-30AD1E(E)-a 03.10.31, 1:15 PM...
  • Page 16 The setup menu disappears and you can watch the programme on channel 1. SAT.1 NOTE • The System can only name channels where the channel labelling information is provided. If channel information is not provided, the System displays “-----”. LC-30AD1E(E)-a 03.10.31, 1:15 PM...
  • Page 17: Virgin Mode

    Press OK to enter the setting. • Installation screen displays. Press OK to go to the next step. Press a/b to select “Service scan”, and then press OK. Country Service scan System software • Search screen displays. LC-30AD1E(E)-a 03.10.31, 1:15 PM...
  • Page 18: Part Names

    INPUT MAIN POWER ( il/k ) button button (X) CHANNEL buttons STANDBY/ON button (CHs/r) Remote control sensor indicator Remote control sensor OPC sensor OPC indicator* STANDBY/ON indicator *OPC: Optical Picture Control (See Pages 59 and 61.) LC-30AD1E(E)-a 03.10.31, 1:15 PM...
  • Page 19: Avc System

    INPUT terminal DC OUTPUT terminal* AV OUTPUT DIGITAL terminals ANTENNA AV OUTPUT terminal INPUT 2 AC INPUT terminal (AUDIO) OUTPUT terminal (VIDEO) terminal (SCART) *Terminal for expanded functionality in the near future. **Connect a digital audio equipment. LC-30AD1E(E)-a 03.10.31, 1:15 PM...
  • Page 20: Remote Control Unit

    TEXT image, TV/TEXT image) (See pages 87 and 88.) Digital mode: Select DTV data broadcasting and TELETEXT. SELECT NOTE To select either screen to be active in Dual screen mode. • When using the remote control unit, point it at the Display. LC-30AD1E(E)-a 03.10.31, 1:15 PM...
  • Page 21 Execute a command. RETURN MENU mode: Return to the previous menu screen. a/b/c/d (Cursor) Select a desired item on the setting screen. DTV mode: Select the channel with a/b. Select the programme information area when EPG is displayed. LC-30AD1E(E)-a 03.10.31, 1:16 PM...
  • Page 22: Watching Tv

    The System is in standby mode. Green The System is on. AVC System status indicator Power off Only the AVC System is in standby mode or the System is in standby mode. The System is on. Green LC-30AD1E(E)-b 03.10.31, 1:16 PM...
  • Page 23: Simple Button Operations For Changing Channels

    • Complete this procedure within 3 seconds, otherwise the selection will not be made on the 2-digit channel mode. When viewing Teletext information View a page directly which is 3-digit page number from 100 to 899 by pressing buttons 0 to 9. LC-30AD1E(E)-b 03.10.31, 1:16 PM...
  • Page 24 • “BBC2” and “99” are tentative network name and channel. BBC2 MONO When receiving a monaural signal Each time you press SOUND, the mode switches between NICAM MONO and MONO. Monaural mode BBC2 NICAM MONO BBC2 MONO LC-30AD1E(E)-b 03.10.31, 1:16 PM...
  • Page 25: Simple Button Operation For Changing Volume/Sound

    Variable sound Mute the previous setting. • After 30 minutes, increase the volume level by Constant as pressing ie. Variable sound AV OUTPUT specified NOTE • See page 82 for details on the audio out function. LC-30AD1E(E)-b 03.10.31, 1:16 PM...
  • Page 26 • ON: Makes it possible to enjoy natural, realistic surround sound. • OFF: Outputs the normal sound. Dolby Virtual : OFF Dolby Virtual : ON NOTE • You can have the same settings by choosing “Dolby Virtual” on the menu items. (See page 58.) LC-30AD1E(E)-b 03.10.31, 1:16 PM...
  • Page 27: Basic Adjustment Settings

    Audio Out ........Page 82 Input Label ........Page 74 Cool Climate ........Page 83 Audio Out ........Page 82 Cool Climate ........Page 83 Colour System ....... Page 75 NOTE • The selectable items differ to the selected mode. LC-30AD1E(E)-c 03.10.31, 1:17 PM...
  • Page 28: Auto Installation

    [Panorama] Full Mode [Mode1] Rotate [Normal] Language [English] If you already set the PIN, enter it here. If not, enter the factory preset PIN “1234”. • See page 84 for setting PIN. – – – – LC-30AD1E(E)-c 03.10.31, 1:17 PM...
  • Page 29: Programme Setup

    MENU Setup Option Auto Installation Programme Setup Child Lock Position [On] 4:3 Mode [Panorama] Full Mode [Mode1] Rotate [Normal] Language [English] Press a/b to select “Auto Search”, and then press OK. Auto Search Manual Adjust Sort LC-30AD1E(E)-c 03.10.31, 1:17 PM...
  • Page 30: Manual Setting For Each Channel

    Child Lock Position [On] 4:3 Mode [Panorama] Full Mode [Mode1] Rotate [Normal] Language [English] Press a/b to select “Manual Adjust”, and then press OK. Auto Search Manual Adjust Sort Press c/d to select “Yes”, and then press LC-30AD1E(E)-c 03.10.31, 1:17 PM...
  • Page 31: Fine Tuning

    0 – 9. • 179.25 MHz: Press 1 s 7 s 9 s 2 s 5 s OK. • 49.25 MHz: Press 4 s 9 s 2 s 5 s OK. LC-30AD1E(E)-c 03.10.31, 1:17 PM...
  • Page 32: Colour System

    Press a/b to select “Sound sys.”, and then press OK. • Receivable sound systems (Broadcasting systems) are listed. Sound menu Fine [179.25] Colour sys. [AUTO] Sound sys. [B/G] Label [SAT.1] Skip [Off] Decoder [Off] Lock [Off] L’ LC-30AD1E(E)-c 03.10.31, 1:17 PM...
  • Page 33: Skipping Channels

    , and the image and sound of the channel is blocked. • When pressing OK while “Child lock has been activated.” displays, PIN input menu will display. Inputting the correct PIN lifts the child lock temporarily until the power is turned off. LC-30AD1E(E)-c 03.10.31, 1:18 PM...
  • Page 34: Sort

    “Skip” to “Off” and blue are set “Skip” to “On”. 01 KABEL SAT.1 Auto Search Manual Adjust Sort Next Press c/d to select “Yes”, and then press Press a/b/c/d to select the channel you want to move, and then press OK. LC-30AD1E(E)-c 03.10.31, 1:18 PM...
  • Page 35: To Enjoy Digital Broadcasts

    To watch programmes found by “Search”, you have to perform “Store”. For details about [GMT+ 1:00] Amsterdam, Berlin, Bern “Store” see page 36. [GMT+ 1:00] Brussels, Copenhagen [GMT+ 1:00] Luxembourg, Madrid, Oslo [GMT+ 1:00] Paris, Rome, Stockholm, Vienna LC-30AD1E(E)-d 03.10.31, 1:19 PM...
  • Page 36: Found Tv Services

    Search Found TV services Found radio services Store Discard Found TV services 1 - BBC ONE 2 - BBC TWO 7 - BBC CHOICE 10- BBC TEXT 11 - BBC NEWS 24 12 - BBC PARLMNT LC-30AD1E(E)-d 03.10.31, 1:19 PM...
  • Page 37: Store

    Discard Press a/b to select “Store”, and then press Press c/d to select “Yes”, and then press Search Discard Found TV services Found radio services Store Discard Press c/d to select “Yes”, and then press Store LC-30AD1E(E)-d 03.10.31, 1:19 PM...
  • Page 38: Banner Duration

    • It may take a few moments to download the info banner Installation data. Access restrictions Press a/b to select “Banner duration”, and then press OK. Languages Time Zone Banner duration Press a/b to select the desired time, and then press OK. Banner duration • Unit: seconds LC-30AD1E(E)-d 03.10.31, 1:19 PM...
  • Page 39: Audio

    • If you select “None”, no subtitles will be and then press OK. displayed. • For details about the language list see page Audio • Languages listed in the list differ to each programme. • For details about the language list see page LC-30AD1E(E)-d 03.10.31, 1:19 PM...
  • Page 40: Teletext

    Banner duration Press a/b to select “Teletext”, and then press OK. Audio Subtitle Teletext Press a/b to select the desired language, and then press OK. Teletext • Languages listed in the list differ to each programme. LC-30AD1E(E)-d 03.10.31, 1:20 PM...
  • Page 41: Reinstall All Services

    • Universal viewing and Parental approval preferable only “Reinstall all services”, you have to perform work in France. “Store”. For details about “Store” see page 36. • X-rated only works in Spain. • For details about rating see page 97. LC-30AD1E(E)-d 03.10.31, 1:20 PM...
  • Page 42: Tv Services

    8 - BBC Asian Network 9 - BBC World Service TV services 1 - BBC ONE 2 - BBC TWO 7 - BBC CHOICE 10- BBC TEXT 11 - BBC NEWS 24 12 - BBC PARLMNT LC-30AD1E(E)-d 03.10.31, 1:20 PM...
  • Page 43: Selecting Programme

    Health & Sport Current affairs 13:30-13:45 Min. left: 0 NOTE • When the DTV menu screen is displayed, the Preset list will not appear. In such case, press DTV MENU to turn off the DTV menu screen. LC-30AD1E(E)-d 03.10.31, 1:20 PM...
  • Page 44: Setting The Theme

    TV and radio. NOTE • When caution appears in radio mode screen, • If no services are found or received, the theme screen press END to turn it off. will not appear. LC-30AD1E(E)-d 03.10.31, 1:20 PM...
  • Page 45: Audio Language

    • Languages listed in the list differ to each programme. • This setting is disabled if the channel is changed or the programme is finished. • For details about setting the default language see page 38. LC-30AD1E(E)-d 03.10.31, 1:20 PM...
  • Page 46: Service List Type

    Press a/b to select “Service list type”, and then press OK. Press a/b to select “Original list of services” or “User-definable list of services”, and then press OK. Service list type Original list of services User-definable list of services LC-30AD1E(E)-d 03.10.31, 1:20 PM...
  • Page 47: Rearrange Tv Services

    Press a/b to select the “Rearrange TV above and follow the same steps 5 to 8 as explained services”, and then press OK. in “Rearrange TV services”. Rearrange TV services New TV services Installed TV services Uninstalled TV services LC-30AD1E(E)-d 03.10.31, 1:20 PM...
  • Page 48: New Tv Services

    New TV services • The services found by search are listed. 1 - BBC ONE 2 - BBC TWO 3 - ITV 1 4 - Channel 4 5 - five • The services found by search are listed. LC-30AD1E(E)-d 03.10.31, 1:21 PM...
  • Page 49: Installed Tv Services

    12 - BBC PARLMNT Installed radio services To perform "Installed radio services", select "Radio service lists" instead of "TV service lists" in step 4 above and follow the same steps 5 and 6 as explained in "Installed TV services". LC-30AD1E(E)-d 03.10.31, 1:21 PM...
  • Page 50: Country

    PIN “1234”. • See page 84 for setting PIN. System software Country Service scan Reinstall all services System software Press a/b to select the country where you are located, and then press OK. Country LC-30AD1E(E)-d 03.10.31, 1:21 PM...
  • Page 51: Dtv Input Mode Menu Items

    Teletext Time Zone Banner duration Installation Country Service scan Search Found TV services Found radio services Store Discard Reinstall all services System software Access restrictions Maturity rating TV services Radio services Preference Audio language Subtitle language LC-30AD1E(E)-d 03.10.31, 1:21 PM...
  • Page 52: Icons

    A single DVB common interface (C.I.) port is provided, which supports scrambled, subscriber based services. Please contact the service provider concerned for details. NOTE • The Common Interface Module is neither supplied or available as an optional accessory. LC-30AD1E(E)-d 03.10.31, 1:21 PM...
  • Page 53: Language Setting For On-Screen Display

    Auto Installation Programme Setup Child Lock Position [On] 4:3 Mode [Panorama] Full Mode [Mode1] Rotate [Normal] Language [English] Press a/b/c/d to select the desired language listed on the screen, and then press OK. English Deutsch Français LC-30AD1E(E)-e 03.10.31, 1:22 PM...
  • Page 54: Picture Adjustments

    For less sharpness For more sharpness For weaker blue For stronger blue NOTE • Select “Advanced” and then press OK to set “C.M.S.”, “Colour Temp”, “Monochrome”, “Film Mode”, “I/P Setting” or “DNR”. See pages 54 to 57. LC-30AD1E(E)-e 03.10.31, 1:22 PM...
  • Page 55: Colour Management System)

    • For resetting all adjustment items to the factory preset Monochrome [ 0] –30 values, press a/b to select “Reset”, and then press OK. Film Mode [ 0] –30 I/P Setting [ 0] –30 [ 0] –30 [ 0] –30 LC-30AD1E(E)-e 03.10.31, 1:22 PM...
  • Page 56: Colour Temperature

    DTV mode displays in monochrome. Monochrome High Film Mode Mid-High I/P Setting Mid-Low Press a/b to select the desired level, and then press OK. Selected item Description High White with bluish tone Mid-High Mid-Low White with reddish tone LC-30AD1E(E)-e 03.10.31, 1:22 PM...
  • Page 57: Film Mode

    Press c/d to select “On”, and then press NOTE • Set the Film Mode to “On” manually to detect a film-based source (originally encoded 24 frames/second) when input source has vertical frequency of 50 Hz (e.g. PAL, SECAM etc.) . LC-30AD1E(E)-e 03.10.31, 1:23 PM...
  • Page 58: Dnr (Digital Noise Reduction)

    Press a/b to select “DNR”, and then press • Some items may be greyed out. They are not selectable. C. M. S. Colour Temp Monochrome Film Mode High I/P Setting Press a/b to select the desired level, and then press OK. LC-30AD1E(E)-e 03.10.31, 1:23 PM...
  • Page 59: Audio Adjustment

    “Yes”, and then press OK. • Audio menu items are greyed out when Audio output is variable or when headphones are in use. • Balance is greyed out when Dolby Virtual is set to “On”. LC-30AD1E(E)-f 03.10.31, 1:24 PM...
  • Page 60: Power Control

    • When setting to “Auto”, the OPC indicator lights up green, senses the surrounding light and automatically adjusts the backlight brightness. Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light. LC-30AD1E(E)-f 03.10.31, 1:24 PM...
  • Page 61 NOTE NOTE • “Disable” is factory preset value. • “Disable” is factory preset value. • When a TV programme finishes, and the AVC System receives signal input, this function may not operate. LC-30AD1E(E)-f 03.10.31, 1:24 PM...
  • Page 62: Power Control For Pc Source

    • When setting to “Auto”, the OPC indicator lights up green, senses the surrounding light and automatically adjusts the backlight brightness. Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light. LC-30AD1E(E)-f 03.10.31, 1:24 PM...
  • Page 63: Using External Equipment

    • To protect all equipment, always turn off the AVC System before connecting to a decoder, VCR, DVD player, PC, game console, camcorder or other external equipment. NOTE • Please refer to the relevant operation manual (DVD player, PC, etc.) carefully before making connections. LC-30AD1E(E)-g 03.10.31, 1:25 PM...
  • Page 64: Watching A Decoder Image

    “INPUT1” in the Programme Setup “Manual” menu. (See page 32.) • Refer to your decoder operation manual for the signal type. MENU [ Option ... Input Select ] • See page 73 for how to select the signal type. CVBS (For INPUT1 signal) LC-30AD1E(E)-g 03.10.31, 1:25 PM...
  • Page 65: Watching A Vcr Image

    “Input Select” menu. [ Option ... Input Select ] MENU • Refer to your VCR operation manual for the signal type. • See page 73 for how to select the signal type. CVBS (For INPUT2 signal) LC-30AD1E(E)-g 03.10.31, 1:25 PM...
  • Page 66: Using Av Link Function

    Automatically transfers the channel preset information from the tuner on the System to the one on the connected audiovisual equipment (e.g. VCR) via the INPUT 2 terminal. NOTE • Refer to operation manuals of each external equipment for the details. LC-30AD1E(E)-g 03.10.31, 1:25 PM...
  • Page 67: Watching A Dvd Image

    • Refer to your DVD player operation manual for the signal INPUT2 type. • See page 73 for how to select the signal type. INPUT3 INPUT4 [ Option ... Input Select ] MENU COMPONENT CVBS (For INPUT3 signal) LC-30AD1E(E)-g 03.10.31, 1:25 PM...
  • Page 68: Enjoying A Game Console And Viewing Camcorder Images

    • Refer to your game console or camcorder operation INPUT2 manual for the signal type. • See page 73 for how to select the signal type. INPUT3 INPUT4 [ Option ... Input Select ] MENU AUTO S-Video Video (For INPUT4 signal) LC-30AD1E(E)-g 03.10.31, 1:25 PM...
  • Page 69: Viewing An Image From A Pc

    Auto Sync. adjustment in the “Setup” menu. (See INPUT SOURCE page 72.) NOTE • Each time b is pressed, the input source toggles. INPUT1 INPUT2 INPUT3 INPUT4 LC-30AD1E(E)-g 03.10.31, 1:25 PM...
  • Page 70: Connecting External Speakers

    • The cables are also divided into plus and minus. • When connecting the left/right speakers, be sure to connect the plus/minus terminals with the correct cables. NOTE • Unplug the AC cord from the AC outlet before installing the speakers. LC-30AD1E(E)-g 03.10.31, 1:25 PM...
  • Page 71: Selecting Speakers

    “Detachable”, and then press OK. External Detachable NOTE • Audio menu items are greyed out when Audio output is variable or when headphones are in use. • Balance is greyed out when Dolby Virtual is set to “On”. LC-30AD1E(E)-g 03.10.31, 1:25 PM...
  • Page 72: Useful Adjustment Settings

    Child Lock Position [On] 4:3 Mode [Panorama] Full Mode [Mode1] Rotate [Normal] Language [English] Press a/b to select “H-Pos.” or “V-Pos.”. H-Pos. –10 V-Pos. –20 Reset Press c/d to adjust the item to your desired position. LC-30AD1E(E)-h 03.10.31, 1:26 PM...
  • Page 73: Auto Sync. Adjustment (Pc Input Mode Only)

    It may fail when an input PC image is solid (low contrast). Clock Adjusts the clock frequency. • Be sure to connect the PC to the AVC System and switch it on before starting Auto Sync. Adjusts the clock phase. Phase LC-30AD1E(E)-h 03.10.31, 1:26 PM...
  • Page 74: Input Signal Source

    • Check the operation manual of the external equipment press OK. for the signal type. [ Option ... Input Select ] MENU Option Input Select Input Label Audio Out [Fixed] Cool Climate [On] Colour System [AUTO] LC-30AD1E(E)-h 03.10.31, 1:26 PM...
  • Page 75: Input Label

    Press c/d to select “Option”. • Option menu displays. Press a/b to select “Input Label”, and then press OK. [ Option ... Input Label ] MENU Option Input Select Input Label Audio Out [Fixed] Cool Climate [On] [AUTO] Colour System LC-30AD1E(E)-h 03.10.31, 1:26 PM...
  • Page 76: Colour System Setting (For Tv/Av Input Mode)

    If an image does not display clearly, USER desired. You can set the mode for each select another colour system (e.g. PAL, NTSC 4.43). input source. • This function is available for AV input mode and TV tuner mode. LC-30AD1E(E)-h 03.10.31, 1:26 PM...
  • Page 77: Wide Mode (For Tv/Av Input Mode)

    For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes. Cinema 16:9 For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes. Cinema 14:9 Normal Zoom 14:9 Panorama Cinema 14:9 Cinema 16:9 Full LC-30AD1E(E)-i 03.10.31, 1:27 PM...
  • Page 78: Wide Mode (For Pc Input Mode)

    The an image with the top and bottom of same number of the image is slightly pixels on the screen. cropped. LC-30AD1E(E)-i 03.10.31, 1:27 PM...
  • Page 79: Input Signal (Pc Input Mode Only)

    • You can only select the “Input Signal” on the Setup menu when receiving one of the 6 input signals listed above. Rotate [Normal] Language [English] Press a/b to select the desired input signal on the display. 640 x 480 848 x 480 (Example) LC-30AD1E(E)-i 03.10.31, 1:27 PM...
  • Page 80: Wide Screen Signalling (Wss) (For Tv/Av Input Mode)

    • Try to set WIDE mode if an image does not switch to the correct screen format. When the broadcast signal contains no WSS information, the function will not work even if enabled. See page 76. • This function is available for AV input mode and TV tuner mode. LC-30AD1E(E)-i 03.10.31, 1:28 PM...
  • Page 81: Selecting Full Mode Display (For Tv/Av Input Mode)

    MENU Setup Option Auto Installation Programme Setup Child Lock Position [On] 4:3 Mode [Panorama] Full Mode [Mode1] Rotate [Normal] Language [English] Press c/d to select “Mode1” or “Mode2”, and then press OK. Mode 1 Mode 2 LC-30AD1E(E)-i 03.10.31, 1:28 PM...
  • Page 82: Rotate

    Press a/b to select “Rotate”, and then press [Normal]: normal image. [Mirror]: mirror image. [Upside Down]: upside [Rotate]: rotated image. down image. A B C NOTE • If you choose “Mirror” or “Rotate”, the sound orientation also changes. LC-30AD1E(E)-i 03.10.31, 1:28 PM...
  • Page 83: Audio Out

    [Fixed] Cool Climate [On] (minutes) (On-screen display for PC input mode.) Press c/d to select “Fixed” or “Variable”, NOTE and then press OK. • Select “0” by pressing SLEEP to cancel the sleep timer. Fixed Variable LC-30AD1E(E)-i 03.10.31, 1:28 PM...
  • Page 84: Cool Climate

    Press c/d to select “On”, and then press NOTE • Cool climate may cause image noise. If this occurs turn the function “Off”. NOTE • Cool climate may cause image noise. If this occurs turn the function “Off”. LC-30AD1E(E)-i 03.10.31, 1:28 PM...
  • Page 85: Pin Setting For Child Lock (For Tv/Dtv/Av Input Mode) See Page

    TV channel settings to factory preset values. (See page 99.) New PIN – – – – • This function is available for AV input mode and TV tuner mode. Reconfirm – – – – LC-30AD1E(E)-i 03.10.31, 1:28 PM...
  • Page 86: Useful Features

    Press c. • Dual screen displays and a selected input source image displays. Press SELECT to set either screen to be active. • “z” displays on the active screen, which has sound output. LC-30AD1E(E)-j 03.10.31, 1:32 PM...
  • Page 87 Press d to exit still image. NOTE • This function does not work in PC input mode. • When this function is not available, “No still image display available.” will display. • The still image automatically goes out after 30 minutes. LC-30AD1E(E)-j 03.10.31, 1:33 PM...
  • Page 88: Teletext Function

    To reveal hidden information such as an answer to a quiz, press k. • Press k again to hide the information. To stop updating Teletext pages automatically, press • Press d again to release the hold mode. LC-30AD1E(E)-j 03.10.31, 1:33 PM...
  • Page 89 • Subtitle is updated by the information sent by the broadcasting station. • To stop updating Subtitle automatically, press Press [ to exit the subtitle screen. NOTE • Subtitle will not be displayed when the service does not contain the subtitle information. LC-30AD1E(E)-j 03.10.31, 1:33 PM...
  • Page 90 2 – 3 above. NOTE • The time display cannot be stored once the power is turned off. When you turn on the power, perform steps 1 – 4 again. LC-30AD1E(E)-j 03.10.31, 1:33 PM...
  • Page 91: Appendix

    • Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction. Storage temperature: –20°C to +60°C (–4°F to +140°F). LC-30AD1E(E)-k 03.10.31, 1:33 PM...
  • Page 92: Pc Compatibility Chart

    Apple Computer, Inc. DDC is a registered trademark of Video Electronics Standards Association. Power Management is a registered trademark of Sun Microsystems, Inc. VGA and XGA are registered trademarks of International Business Machines Co., Inc. LC-30AD1E(E)-k 03.10.31, 1:33 PM...
  • Page 93: Rs-232C Port Specifications

    When the input parameter is not within an adjustable range, “ERR” returns. (Refer to “Response code format”.) No problem to input any numerical value for “x” on the table. – When “?” is input for some commands, the present setting value responds. LC-30AD1E(E)-k 03.10.31, 1:33 PM...
  • Page 94 PHASE (0 – 40) NOTE • If an underbar (_) appears in the parameter column, enter a space. • If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS. LC-30AD1E(E)-k 03.10.31, 1:33 PM...
  • Page 95: Connecting Pin Assignments For Scart

    17. Earth for video 11. Green input Common earth for audio 18. Earth 12. Not used Earth 19. TV Monitor output Audio left input 13. Earth 20. Video input/S-video input Blue input 14. Not used 21. Plug shield LC-30AD1E(E)-k 03.10.31, 1:33 PM...
  • Page 96: Specifications

    (g2), AVC system stand unit (g1), Cable clamp (Large g1, Small g1), Antenna cable (g1) • As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.
  • Page 97: Dimensional Drawings

    Dimensional drawings Display Unit: mm 644.2 LC-30AD1E(E)-k 03.10.31, 1:33 PM...
  • Page 98 — — viewing Parental approval — — — — — — — — — — preferable X-rated Parental approval Rating Universal viewing X-rated preferable Universal — — — viewing Parental approval — — preferable X-rated — LC-30AD1E(E)-k 03.10.31, 1:33 PM...
  • Page 99 (1) For our customers in Belgium, The Netherlands, Sweden, and Switzerland SHARP takes part in the respective national recycling systems for electronic equipment, which have been founded on the basis of the environmental laws in these countries.
  • Page 100 Press c/d to select “Yes”, and then press OK. The PIN is NOTE • As a precautionary measure, make a note of your PIN above, scissor it from this manual, and keep it in a familiar place. LC-30AD1E(E)-k 03.10.31, 1:34 PM...

Table of Contents