Sharp LC-30AD1E Operation Manual page 61

Basic adjustment settings
No Signal off
When set to "Enable", the power will automatically shut
down if no signal inputs for 15 minutes.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Power control".
• Power control menu displays.
3
Press a/b to select "No Signal Off", and
then press OK.
[ Power control ... No Signal Off ]
MENU
Power control
Power Save
No Signal Off
No Operation Off
4
Press c/d to select "Enable", and then
press OK.
Enable
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
• When a TV programme finishes, and the AVC System
receives signal input, this function may not operate.
60
LC-30AD1E(E)-f
Setup
[Manual]
[Disable]
[Disable]
Disable
60
No Operation off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Power control".
• Power control menu displays.
3
Press a/b to select "No Operation Off", and
then press OK.
[ Power control ... No Operation Off ]
MENU
Power control
Power Save
No Signal Off [Disable]
No Operation Off [Disable]
4
Press c/d to select "Enable", and then
press OK.
Enable
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
03.10.31, 1:24 PM
Setup
[Manual]
Disable