Avc System - Sharp LC-30AD1E Operation Manual

Part names

AVC System

Front view
PC INPUT terminal (AUDIO)
STANDBY/ON
indicator
POWER button
* If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting. In this
case, press CLEAR, shown in the diagram, lightly with the end of a ballpoint pen or other pointed object.
This will reset the System as shown below.
• AV MODE resets to USER.
• Analogue TV channel resets to channel 1.
• Dual screen resets to normal.
• Audio setting initialises.
• Dolby Virtual resets to Off.
• Image position is initialised.
• Input Label is initialised.
** The product may not function when receiving strong noise (e.g. excessive static electricity, power surge or
abnormal voltage due to lightning) or if operations are performed incorrectly. In such case, press DIGITAL
RESET and try operating again.
NOTE
• Pressing CLEAR will not work if the System is in standby mode (indicator lights red).
• Pressing CLEAR will not delete channel preset and PIN. See page 84 for resetting the PIN when you know it. See page
99 for initialising to the factory preset values when you forget your PIN.
INPUT 3 terminals (Y, P
Rear view
ANTENNA INPUT terminal
COMMON
INTERFACE slot
AV OUTPUT terminal
(VIDEO)
*Terminal for expanded functionality in the near future.
**Connect a digital audio equipment.
18
LC-30AD1E(E)-a
INPUT 4 terminal (VIDEO)
DIGITAL RESET**
PC INPUT terminal
(ANALOG RGB)
CLEAR* INPUT 4 terminal (S-VIDEO)
(C ) P
B B , R
INPUT 3 terminal
(SCART)
INPUT 1
terminal
(SCART)
RS-232C DIGITAL ANTENNA
terminal* INPUT terminal
AV OUTPUT
terminals
INPUT 2
(AUDIO)
terminal
(SCART)
18
Headphone
INPUT 4 terminals (AUDIO)
(C )) RS-232C terminal
R
DISPLAY OUTPUT1 terminal
EXTERNAL SPEAKER
terminals
DIGITAL-AUDIO
OUTPUT
terminal**
DISPLAY OUTPUT3
DC OUTPUT
terminal*
DIGITAL
ANTENNA
OUTPUT terminal
03.10.31, 1:15 PM
(When connecting headphones, the
sound from the speakers is muted.)
(How to open the door)
DISPLAY OUTPUT2
terminal
terminal
AC INPUT terminal