Sharp LC-30AD1E Operation Manual page 90

Useful features (Analogue)
Time display
You can display the time information included in the
Teletext. Follow the steps below to display the time.
NOTE
• If receiving a digital broadcast, you can only display the
time by performing steps 2 and 3 below.
1
Select a TV channel providing Teletext
information.
(The time information is automatically
captured.)
NOTE
• The time is not captured when a selected channel has no
Teletext information.
2
Press p. The channel display will appear
on the Display.
3
Press p again within the three-second
interval the channel display is on the screen.
Time information will display on the lower left
of the screen for about three seconds.
4
Even when you change the TV channel, you
can display the time information with steps
2 – 3 above.
NOTE
• The time display cannot be stored once the power is
turned off. When you turn on the power, perform steps 1 –
4 again.
LC-30AD1E(E)-j 89 03.10.31, 1:33 PM
89