Denon DN-501C Owner's Manual page 40

n Set and allocate the Hot Start folder
The first 20 files in the selected folder are automatically allocated
to the Hot Start buttons.
FILE LIST
\
01
02
03
04
05
1
On the main screen, press FILE LIST
The file list is displayed.
2
Select the folder you would like to set with the jog
dial.
3
Press LOAD .
The first 20 files in the selected folder are automatically
assigned to the hot start button.
"Completed" is displayed, and the settings are completed.
These settings can only be configured during stop, pause or cue
modes.
n Set and allocate Hot Start points
Assign the Hot Start button for the file or point that you would like
to play back.
FILE LIST
\ MPGLANG \
EXIT
0123456789012345678901234567
abcdefg.MP3
0001
abcdefg.MP3
0002
Honey01.MP3
0003
Please select
abcdefg00.MP3
0004
HOTSTART button.
abcdefg01.MP3
LOAD
0005
abcdefg02.MP3
0006
abcdefg03.MP3
0007
abcdefg04.MP3
----
abcdefg05.MP3
0009
1
. On the main screen, press
The file list is displayed.
2
Select the file you want to set with the jog dial.
Or, pause at the point where you want to resume
playback in the set file.
Press the jog dial to play back the selected file.
3
Press LOAD .
• "Please select HOT START button" is displayed.
• To cancel, press 20.
4
Press the Hot Start button you want to allocate the
setting to.
• "Completed" is displayed and the setting has changed.
• Press the HOT START button to perform Hot Start playback.
Hot Starts can only be set in the stop or cue modes.
n Save the Hot Start list
Convert the allocated Hot Start list into a file and save it to a
USB device connected to the DN-501C. If this file exists in the
USB device, the Hot Start list in this file is automatically used for
allocation.
EXIT
1
2
LOAD
NOTE
When the Hot Start list is loaded and any audio file in the list is missing
on the media, that file is removed from the Hot Start list.
FILE LIST .
34 34
Various playback functions with RC-F400S
On the main screen, press HOT LIST .
The Hot Start list is displayed.
STORE
Press .
• The Hot Start list is saved as "DN-501C.ppl" in the root
directory of the USB device connected to the DN-501C.
• A saved PPL file can be re-read by operating the DN-501C.