FujiFilm FinePix XP30 Series Owner's Manual page 70

_Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected _#I
directly to the printer as shown below and pictures can be printed
rJ
without first being copied to a computer. Note that depending on Pictltfidge
the printer, not all the functions described below may be supported.
1 Connect the supplied USBcable as shown and turn the printer on.
(l) Besure the battery-chamber cover is open before attempting to open or close
the connector cover.
Connector cover Bottery-chomber cover
2 Press the [] button for about a second to turn the camera on.
3 Press the selector left or right to display a picture you wish to print.
4 Press the selector up or down to choose the number of copies (up to gg).
5 Repeat steps 3-4 to select additional pictures. Press MENU/OK to display a
confirmation dialog when settings are complete.
52 ( (: (:;