FujiFilm FinePix XP30 Series Owner's Manual page 14

• After Use
':!) Remove any foreign matter from the water-resistant seal and adjacent surfaces. Foreign mat-
ter could damage the seal, lowering water resistance.
':!) After using the camera underwater or in locations where foreign matter might adhere to the
camera body, rinse the camera under the tap or leave it in a basin of flesh water for two to
three minutes.
':!) Liquid soaps, detergents, alcohol, and other cleansers may affect water resistance and should
never be used.
':!) After use, remove water droplets and foreign matter with a dry cloth, firmly latch the battery-
chamber cover, and soak the camera in fresh water for about ten minutes. Dry the camera
thoroughly after removing it from the water.
• Storageand Maintenance
':!'_Do not store at temperatures below 0 °C (32 °F) or above 40 °C (104 °F).
':!) To ensure continued water resistance, it is recommended that you have the water-resistant
seal replaced about once a year (a fee is charged for this service). Contact your retailer or a
FUJIFILM-authorized repair technician for more information.
• Cold Climates
':!) Battery performance drops at low temperatures, reducing the number of pictures that can be
taken. Insulate the camera to keep it warm or place it in your clothing.
':!) Use an NP-45A battery.
':!) Display response may slow at low temperatures.This is not a malfunction.
_V