FujiFilm FinePix XP30 Series Owner's Manual page 46

Si_ooting Mode
4 Take the last shot as described in Step 3.
_, To end shooting and create a panorama after the first or second shot, press the
multi selector up after completing Step 2 or Step 3 and proceed to Step 5.
5 Press MENU/OK to save the picture.
(l> Panoramas are created from multiple frames. The camera may in some cases be
unable to stitch the frames together perfectly.
(!) Tile desired results may not be achieved with moving subjects, subjects close to
the camera, unvarying subjects such as the sky or a field of grass, subjects that are
in constant motion, such as waves and waterfalls, or subjects that undergo marked
changes in brightness. Panoramas may be blurred if the subject is poorly lit.
Depending on the page size and tile size of tile panorama, panoramas may print
with their edges cropped out or with wide margins at the top and bottom or at
both sides.