Ricoh SP 5200S Initial Manual page 22

1. Using the Scanner Function
5. Check that [Program / Change] is selected.
6. Press [New Program].
7. Press [Change] under "Name".
1
8. Enter the name, and then press [OK].
If necessary, press [Change] under "Key Display", and then enter the name of the key to which the
destination is assigned.
9. Press the key for the classification you want to use under "Select Title".
10. Press [Folder].
11. Press [FTP].
12. Press [Change] under "Server Name".
13. Enter the server name, and then press [OK].
14. Press [Change] under "Path".
15. Enter the path, and then press [OK].
You can enter an absolute path, using this format: "\user\ home\username"; or a relative path,
using this format: "directory\sub-directory".
If you leave the path blank, the login directory is assumed to be the current working directory.
16. To change the port number, press [Change] under "Port Number".
17. Enter the port number using the number keys, and then press the [ ] key.
18. Press [Connection Test] to check that the path is set correctly.
20