Basic Operation For Receiving A Fax; Manual Reception; Auto Reception - Ricoh SP 5200S Initial Manual
Ricoh initial guide for scanner and fax
Hide thumbs
Also See for SP 5200S:
- Operating instructions manual (372 pages) ,
- Service manual (667 pages) ,
- Quick manual (6 pages)
Table of Contents
Advertisement
Basic Operation for Receiving a Fax
This section describes how to receive a fax.
Manual Reception
When a telephone call comes in, the machine rings. If the call is a fax document, you must switch
manually to facsimile mode.
1.
When the machine rings, pick up the handset of the external telephone.
2.
If you hear beeps, press the [Start] key, or hold the [Facsimile] key down for a few
seconds.
3.
If you pressed the [Start] key in step 2, press [Start RX].
4.
Replace the handset of the external telephone. The machine will start receiving.
Auto Reception
When a telephone call comes in, the machine automatically receives it as a fax document.
Basic Operation for Receiving a Fax
2
39
Advertisement
Table of Contents
